From: Matthew Mondor Date: Wed, 12 Jan 2005 07:44:59 +0000 (+0000) Subject: Initial import of bahamut-1.8.3 X-Git-Tag: rubiks-ircd-1-0-6~50 X-Git-Url: http://git.pulsar-zone.net/?a=commitdiff_plain;h=6fc557497d3bf11b6aeffc6bca11eebbea0b679d;p=rubiks-ircd.git Initial import of bahamut-1.8.3 --- 6fc557497d3bf11b6aeffc6bca11eebbea0b679d diff --git a/CHANGES b/CHANGES new file mode 100644 index 0000000..b53d508 --- /dev/null +++ b/CHANGES @@ -0,0 +1,164 @@ +Changes for 1.8.3 +----------------- + +- Fixed rehash bug with specific conf changes that caused memory + corruption and crashes +- Fixed a possible buffer overflow issue in oper hostmasking +- Fixed solaris devpoll socket engine logic problems. +- Fixed class reference counting errors. +- Fixed a bug with cmode +j propagation on resync +- Added a second set of join counters to send warning notices + to +d opers when the default thresholds are met. Still sends + a throttle notice when cmode +j thresholds are met. +- Changed ERR_BANLISTFULL to respond depending on which list + (+b/+I/+e) is full. From Unim4trix0 (Unim4trix0@gmail.com). +- Readded clone limiting (now better!), see doc/clones.txt +- Range limiting for cmode +j args (static 4:2 - 60:60, rate 1/8 - 2/1). +- Fixed spamming redudant cmode changes. +- Fixed bad handling of bogus oper messages (from Zeke Gomez). +- Fixed rehash issue with module blocks. +- Fixed samode with no mode arguments choosing one at random for you :) +- Increased throughput on data sent to clients. +- Changed ERR_CHANNELISFULL to respond depending on which limit + (+l/+j) is reached. From Unim4trix0 (Unim4trix0@gmail.com), + discovered by Watchminister (watchminister@gmail.com). +- Changed cmode +O join rejection to use ERR_INVITEONLY numeric. +- Enabled umode +s (oper kills) for users, disabled +g (useless). +- RWHO now sports clone and joined channel awareness. +- Added flags token to allow blocks, see doc/reference.conf +- Allow blocks with passwords are now hidden from nonopers in /stats I + + +Changes for 1.8.2 +----------------- + +- fixed entropy generation on OpenBSD and cleaned up status messages + (from Mark19960) +- fixed cosmetic error in /stats C reply +- fixed autoconnect blast when connect->port was specified but not + class->connfreq (from Mark19960) +- fixed crash on /stats request from a server (from Mark19960) +- fixed invite exceptions not working at all (from wshs) +- fixed ban exemptions not affecting bquiet (from wshs) +- fixed -e/-I sync failure during netbursts of older channels +- tweaked reference.conf +- corrected new find_port() check +- now removing simbans (restrict blocks) on rehash (from Ballsy) +- fixed cosmetic errors in nick collision kills (from Goplat) +- Converted old "X line" messages to "X block" +- Changed stray free() to MyFree() +- Corrected a tolower() reference I missed the first time around +- Removed ancient prototype causing compile failures with gcc 3.4 +- Fixed 005 WATCH token (was using incorrect number) +- Removed temporary debug code causing compile failure when !USE_SYSLOG +- Finished correcting same port, multiple IP binds +- stats L shows user IPs again (but still hides opers) +- Numerics 477 and 487 no longer hardcoded dal.net +- Fixed numeric responses for certain PRIVMSG/NOTICE targets +- Updated reference.conf and template.conf with additional bits and better + documentation of Allow block quirks +- Tweaked handling and display of removed-but-not-yet-deleted conf entries + after a rehash (Oper, Connect, Class) +- Oper block host entries are now matched against the user@host that would + appear on IRC (previously what they matched was a bit convoluted) +- Corrected class maxusers handling -- applies to the class, not the allow + block +- Updated 004 and 005 numerics +- trace now shows the class list again +- bquiet is now using deferred cache concept from ratbox to deal with ban + exemptions correctly +- Ban exemptions are now marked with type and checked during nick_is_banned() +- Begin unbreaking redundant ban check -- will take at least one more release + to complete +- Cleaned up related channel ban code +- CHOOK_10SEC is now called when it should be (from wshs) +- Unbroke modules command handling (from wshs) +- Fixed modules load crash when there was no Modules block in ircd.conf + (from wshs) +- Fixed SVSKILL crash on no parameters (from Zeke Gomez) +- Compile fixes for DNS_DEBUG and DEBUGMODE (but don't use DEBUGMODE) +- Compile fix for missing LINE_MAX +- Spellcheck: virii -> viruses (from The List) +- HIDE_LINKS functionality inverted and attached to show_links token in + Options block +- NO_CHANOPS_WHEN_SPLIT functionality inverted and attached to allow_split_ops + token in Options block +- Merging duplicate Allow blocks during rehash to avoid admin confusion +- Boolean Options block items can now be disabled by rehash +- Fixed "servtype hub" causing certain previously specified options to reset + to defaults +- Fixed a loop error report that was broken when it was introduced 11 years ago +- Ignoring SVSMODE +o/O attempts (not handled correctly) +- Repaired showing of +s channels in LIST to +A users +- Fixed and document DENY_SERVICES_MSGS (from wshs) +- Corrected structfunc.h prototypes for modules (from wshs) +- Added SVSMODE -e/-I support for channels +- Fixed .maxclients not being read on startup +- Rewrote m_invite(), behaves logically now +- Enabled cmode +j (joins:secs rate limit) +- Fixed resolver cache corruption (and crash), mostly affected newer RedHat + thanks huni and Sarcast for patience, analysis, and cores +- More conf documentation clarity +- Unresolved class reference in conf now reports class name +- Updated RPL_VERSION, RPL_ISUPPORT; now running from a cache in s_debug.c +- Removed sockhost data from RPL_YOURHOST, since it was always zeroed +- Squished more memory corruption bugs + thanks Glitch and dev0 for more patience and cores +- Module support is now unconditionally disabled under OS X +- Build system now handles FD_SETSIZE properly when using the select engine +- Internal maxconnections and SET MAX handling is rational again + ircd can run with as few as 20 FDs and support 10 clients +- Ripped out obsolete sendto_match_servs() +- Added support for non-noquit servers in #define NOQUIT +- Updated zlib to version 1.2.1 +- Restricted stats q/Q/g to opers +- Show IPs in stats C to services and local +A +- Added RWHO, see /rwho ? and doc/pcrepattern.html for info +- Set +k and +s umodes to opers only. +- Fixed a bug in m_trace that caused cores when issuing a /trace when + connecting to a server. +- ERR_WHOSYNTAX reply changed to ERR_NOPRIVILEGES for non opers trying oper + restricted who, but using correct syntax + fixed by Unim4trix0 (Unim4trix0@gmail.com) + + +Changes for 1.8.0 +----------------- + +- Removed backwards compatibility for: + - NOQUIT + - UNCONNECT + - TSMODE + - NICKIP + All of these modes are now REQUIRED. +- Removed Code and defines for outdated stuff: + - FOLLOW_IDENT_RFC + - NO_IDENT_SYSTYPE_OTHER + - NO_MIXED_CASE + - OLD_Y_LIMIT + - USE_REJECT_HOLD + This code is no longer used. +- Removed define options for: + - CLIENT_COUNT + This code is now manditory. +- Completely rewrote configuration structures. +- Rewrote methods for connecting to servers. +- Outdated Link structure config linking, now linking directly from + aClient(user/serv) structures to appropriate conf strucutures. +- Backported lucas's aListener structure and routines from defunct + bahamut-devel tree. +- Implemented +I/+e channel lists - thanks seddy. +- Ports now can be opened and closed on /rehash +- config file format changed to bind-style +- klinefile outdated +- replaced dbufs with sbufs - shared buffers. +- removed old High Traffic Mode (HTM) code +- config option block added to outdate use of ./config script +- fixes for solaris and OSX compatibility +- Added support for /dev/poll and epoll socket engines - thanks seddy. +- Moved m_server and m_dkey into m_server.c +- Moved m_stats into m_stats.c +- Fixed memory counting routines. Thanks Quension! +- Outdated modules.ini and all inifile uses - now a modules {} conf block +- Updated m_module to allow non-admin viewing of hooks and loaded modules +- Added module hooks for user and channel targetted privmsgs diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..1bf9b85 --- /dev/null +++ b/INSTALL @@ -0,0 +1,29 @@ +HOW TO BUILD: +------------- +1. Run the configure script. It will setup include/setup.h and the + Makefiles to match your system: + ./configure + + Type ./configure --help to see different options. Most people will not + need to alter these. + +2. [DISCOURAGED] Edit the the "include/config.h" file. This allows you to + change various options of how the ircd will operate. Usually the defaults + are OK. + +3. "make" should build ircd. + +4. "make install" will install the ircd, config converter, and documents + to the directory set by ./configure + +5. Edit example.conf in your install directory, and move it to "ircd.conf". + +6. Run the binary! ircd will look in the directory you are executing from + for an ircd.conf first, then it will look to the directory local to itself. + You may override these options by specifying a config file using: + ./ircd -f path/to/ircd.conf + +Best of luck! +-The Bahamut Team + +$Id: INSTALL,v 1.1 2005/01/12 07:44:55 mmondor Exp $ diff --git a/LICENCE.pcre b/LICENCE.pcre new file mode 100644 index 0000000..09a242c --- /dev/null +++ b/LICENCE.pcre @@ -0,0 +1,54 @@ +PCRE LICENCE +------------ + +PCRE is a library of functions to support regular expressions whose syntax +and semantics are as close as possible to those of the Perl 5 language. + +Written by: Philip Hazel + +University of Cambridge Computing Service, +Cambridge, England. Phone: +44 1223 334714. + +Copyright (c) 1997-2003 University of Cambridge + +Permission is granted to anyone to use this software for any purpose on any +computer system, and to redistribute it freely, subject to the following +restrictions: + +1. This software is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +2. The origin of this software must not be misrepresented, either by + explicit claim or by omission. In practice, this means that if you use + PCRE in software that you distribute to others, commercially or + otherwise, you must put a sentence like this + + Regular expression support is provided by the PCRE library package, + which is open source software, written by Philip Hazel, and copyright + by the University of Cambridge, England. + + somewhere reasonably visible in your documentation and in any relevant + files or online help data or similar. A reference to the ftp site for + the source, that is, to + + ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/ + + should also be given in the documentation. However, this condition is not + intended to apply to whole chains of software. If package A includes PCRE, + it must acknowledge it, but if package B is software that includes package + A, the condition is not imposed on package B (unless it uses PCRE + independently). + +3. Altered versions must be plainly marked as such, and must not be + misrepresented as being the original software. + +4. If PCRE is embedded in any software that is released under the GNU + General Purpose Licence (GPL), or Lesser General Purpose Licence (LGPL), + then the terms of that licence shall supersede any condition above with + which it is incompatible. + +The documentation for PCRE, supplied in the "doc" directory, is distributed +under the same terms as the software itself. + +End diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..9a17037 --- /dev/null +++ b/LICENSE @@ -0,0 +1,249 @@ + + GNU GENERAL PUBLIC LICENSE + Version 1, February 1989 + + Copyright (C) 1989 Free Software Foundation, Inc. + 675 Mass Ave, Cambridge, MA 02139, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The license agreements of most software companies try to keep users +at the mercy of those companies. By contrast, our General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. The +General Public License applies to the Free Software Foundation's +software and to any other program whose authors commit to using it. +You can use it for your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Specifically, the General Public License is designed to make +sure that you have the freedom to give away or sell copies of free +software, that you receive source code or can get it if you want it, +that you can change the software or use pieces of it in new free +programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of a such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must tell them their rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any program or other work which +contains a notice placed by the copyright holder saying it may be +distributed under the terms of this General Public License. The +"Program", below, refers to any such program or work, and a "work based +on the Program" means either the Program or any work containing the +Program or a portion of it, either verbatim or with modifications. Each +licensee is addressed as "you". + + 1. You may copy and distribute verbatim copies of the Program's source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this +General Public License and to the absence of any warranty; and give any +other recipients of the Program a copy of this General Public License +along with the Program. You may charge a fee for the physical act of +transferring a copy. + + 2. You may modify your copy or copies of the Program or any portion of +it, and copy and distribute such modifications under the terms of Paragraph +1 above, provided that you also do the following: + + a) cause the modified files to carry prominent notices stating that + you changed the files and the date of any change; and + + b) cause the whole of any work that you distribute or publish, that + in whole or in part contains the Program or any part thereof, either + with or without modifications, to be licensed at no charge to all + third parties under the terms of this General Public License (except + that you may choose to grant warranty protection to some or all + third parties, at your option). + + c) If the modified program normally reads commands interactively when + run, you must cause it, when started running for such interactive use + in the simplest and most usual way, to print or display an + announcement including an appropriate copyright notice and a notice + that there is no warranty (or else, saying that you provide a + warranty) and that users may redistribute the program under these + conditions, and telling the user how to view a copy of this General + Public License. + + d) You may charge a fee for the physical act of transferring a + copy, and you may at your option offer warranty protection in + exchange for a fee. + +Mere aggregation of another independent work with the Program (or its +derivative) on a volume of a storage or distribution medium does not bring +the other work under the scope of these terms. + + 3. You may copy and distribute the Program (or a portion or derivative of +it, under Paragraph 2) in object code or executable form under the terms of +Paragraphs 1 and 2 above provided that you also do one of the following: + + a) accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of + Paragraphs 1 and 2 above; or, + + b) accompany it with a written offer, valid for at least three + years, to give any third party free (except for a nominal charge + for the cost of distribution) a complete machine-readable copy of the + corresponding source code, to be distributed under the terms of + Paragraphs 1 and 2 above; or, + + c) accompany it with the information you received as to where the + corresponding source code may be obtained. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form alone.) + +Source code for a work means the preferred form of the work for making +modifications to it. For an executable file, complete source code means +all the source code for all modules it contains; but, as a special +exception, it need not include source code for modules which are standard +libraries that accompany the operating system on which the executable +file runs, or for standard header files or definitions files that +accompany that operating system. + + 4. You may not copy, modify, sublicense, distribute or transfer the +Program except as expressly provided under this General Public License. +Any attempt otherwise to copy, modify, sublicense, distribute or transfer +the Program is void, and will automatically terminate your rights to use +the Program under this License. However, parties who have received +copies, or rights to use copies, from you under this General Public +License will not have their licenses terminated so long as such parties +remain in full compliance. + + 5. By copying, distributing or modifying the Program (or any work based +on the Program) you indicate your acceptance of this license to do so, +and all its terms and conditions. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the original +licensor to copy, distribute or modify the Program subject to these +terms and conditions. You may not impose any further restrictions on the +recipients' exercise of the rights granted herein. + + 7. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of the license which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +the license, you may choose any version ever published by the Free Software +Foundation. + + 8. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to humanity, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + + To do so, attach the following notices to the program. It is safest to +attach them to the start of each source file to most effectively convey +the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + + Copyright (C) 19yy + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19xx name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the +appropriate parts of the General Public License. Of course, the +commands you use may be called something other than `show w' and `show +c'; they could even be mouse-clicks or menu items--whatever suits your +program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + program `Gnomovision' (a program to direct compilers to make passes + at assemblers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..366a1bd --- /dev/null +++ b/Makefile.in @@ -0,0 +1,117 @@ +# IRC - Internet Relay Chat, Makefile +# Copyright (C) 1990, Jarkko Oikarinen +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 1, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# $Id: Makefile.in,v 1.1 2005/01/12 07:44:55 mmondor Exp $ + +RM=@RM@ +MV=@MV@ + +ENGINE=@SENGINE@ + +SHELL=/bin/sh +SUBDIRS=zlib src doc tools +INSTDIRS=src doc tools +CLEANSUBDIRS=src tools + +CC=@CC@ +CFLAGS=@CFLAGS@ +LIBS=@LIBS@ + +INSTALL_DIR=@INSTALL_DIR@ + +all: build + +build: + -@if [ ! -f include/setup.h ] ; then \ + echo "Hmm...doesn't look like you've run configure..."; \ + echo "Doing so now."; \ + sh configure; \ + fi + @for i in $(SUBDIRS); do \ + echo "Building $$i";\ + cd $$i;\ + ${MAKE} build; cd ..;\ + done + @echo "******************************************************************************" + @echo "* For help with bahamut, please refer to http://bahamut.dal.net/ *" + @echo "* If you encouter serious security related bugs, please mail coders@dal.net *" + @echo "* For other bug reports and inquiries, please mail dalnet-src@dal.net *" + @echo "* Thank you for choosing Bahamut! - The DALnet coding team *" + @echo "******************************************************************************" + +profile: + @for i in $(SUBDIRS); do \ + echo "Building $$i [profile]";\ + cd $$i;\ + ${MAKE} profile; cd ..;\ + done + +clean: + ${RM} -f *~ core + @for i in $(CLEANSUBDIRS); do \ + echo "Cleaning $$i";\ + cd $$i;\ + ${MAKE} clean; cd ..;\ + done + -@if [ -f include/setup.h ] ; then \ + echo "To really restart installation, make distclean" ; \ + fi + +fullclean: + ${RM} -f *~ core + @for i in $(SUBDIRS); do \ + echo "Cleaning $$i";\ + cd $$i;\ + ${MAKE} clean; cd ..;\ + done + -@if [ -f include/setup.h ] ; then \ + echo "To really restart installation, make distclean" ; \ + fi + +distclean: + ${RM} -f Makefile *~ *.rej *.orig core ircd.core *.tmp + ${RM} -f config.status config.cache config.log + cd include; ${RM} -f setup.h *~ *.rej *.orig options.h; cd .. + @for i in $(SUBDIRS); do \ + echo "Cleaning $$i";\ + cd $$i;\ + ${MAKE} distclean; cd ..;\ + done + +depend: + @for i in $(SUBDIRS); do \ + echo "Making dependencies in $$i";\ + cd $$i;\ + ${MAKE} depend; cd ..;\ + done + +install: all + @if test ! -d $(INSTALL_DIR); then \ + echo "Creating directory $(INSTALL_DIR)"; \ + mkdir $(INSTALL_DIR); \ + fi + @for i in $(INSTDIRS); do \ + cd $$i; \ + $(MAKE) install; \ + cd ..; \ + done + @echo "" + @echo "Now edit $(INSTALL_DIR)/template.conf" + @echo "and move it to ircd.conf - and you'll be all set." + @echo "See the doc/ directory and the INSTALL file for more assistance" + @echo "Thank you for choosing Bahamut!" + @echo "" diff --git a/README b/README new file mode 100644 index 0000000..503c31b --- /dev/null +++ b/README @@ -0,0 +1,18 @@ +Welcome to Bahamut 1.8 +---------------------- + +Please refer to the INSTALL file for help instructions on building and +installing ircd. The doc/ directory may also be of interest. + +Please refer to the CHANGES file to see what has changed in the 1.8 +revision of Bahamut. + +*** IMPORTANT *** +Please send any SECURITY RELATED bugs to coders@dal.net - any +non-critical bugs can be sent to dalnet-src@dal.net - a public list +for code discussion. + +Thanks! +-Bahamut Team + +$Id: README,v 1.1 2005/01/12 07:44:55 mmondor Exp $ diff --git a/TODO b/TODO new file mode 100644 index 0000000..0924fd6 --- /dev/null +++ b/TODO @@ -0,0 +1,15 @@ +Future TODO List +---------------- + +- Split up aClient into separate structures for local and remote users +- Backport message tokenization from 1.6 +- Carve off throttling into its own hook module +- Revamp hashing to use a generic hashing model (like throttling). +- Implement IPV6 + +List to Ponder +-------------- + +- Add support for multiple language sets via flatfile configuration +- Switch encryption to RSA +- Backport IDENTITY from 1.6 diff --git a/config.guess b/config.guess new file mode 100755 index 0000000..98eede0 --- /dev/null +++ b/config.guess @@ -0,0 +1,1388 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. + +timestamp='2003-02-22' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && exit 0 + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + *:UNICOS/mp:*:*) + echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + # Determine whether the default compiler uses glibc. + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #if __GLIBC__ >= 2 + LIBC=gnu + #else + LIBC= + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:3*) + echo i586-pc-interix3 + exit 0 ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + case `uname -p` in + *86) UNAME_PROCESSOR=i686 ;; + powerpc) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.sub b/config.sub new file mode 100755 index 0000000..2bd3a7c --- /dev/null +++ b/config.sub @@ -0,0 +1,1489 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. + +timestamp='2003-02-22' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | msp430 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* \ + | m32r-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | msp430-* \ + | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nv1) + basic_machine=nv1-cray + os=-unicosmp + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic4x | c4x*) + basic_machine=tic4x-unknown + os=-coff + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/configure b/configure new file mode 100755 index 0000000..7f5fb61 --- /dev/null +++ b/configure @@ -0,0 +1,8235 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.57. +# +# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS PACKAGE VERSION CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os SET_MAKE RM CP MV INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CPP EGREP ENCRYPT_SRC SSL_INCLUDES SSL_LIBS SENGINE INSTALL_DIR LIBOBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-hookmodules disable support for loadable hook modules + --enable-openssl=DIR Enable OpenSSL support (DIR optional). + --disable-openssl Disable OpenSSL support. + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-socketengine=TYPE Set the socketengine type. Choices are: + kqueue poll select + --with-maxconnections=NUMBER Set the maximum number of sockets. + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core core.* *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + ac_config_headers="$ac_config_headers include/setup.h" + + +PACKAGE=bahamut-release +VERSION=1.8 + + + +# autoheader templates + + + + + + + + + + + + + + + + + + + + + + + + + +# Check whether --enable-hookmodules or --disable-hookmodules was given. +if test "${enable_hookmodules+set}" = set; then + enableval="$enable_hookmodules" + +else + check_hmodules="yes" +fi; + +# Check whether --enable-openssl or --disable-openssl was given. +if test "${enable_openssl+set}" = set; then + enableval="$enable_openssl" + cf_enable_openssl=$enableval +else + cf_enable_openssl="auto" +fi; + + +# Check whether --with-socketengine or --without-socketengine was given. +if test "${with_socketengine+set}" = set; then + withval="$with_socketengine" + check_sengine=$withval +else + check_sengine="yes" +fi; + +# Check whether --with-maxconnections or --without-maxconnections was given. +if test "${with_maxconnections+set}" = set; then + withval="$with_maxconnections" + check_maxconnections=$withval +else + check_maxconnections="auto" +fi; + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output" >&5 +echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking CFLAGS for maximum warnings" >&5 +echo $ECHO_N "checking CFLAGS for maximum warnings... $ECHO_C" >&6 +if test "${ac_cv_cflags_warn_all+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_cflags_warn_all="no, unknown" + + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_save_CFLAGS="$CFLAGS" +for ac_arg in "-pedantic % -Wall" "-xstrconst % -v" "-std1 % -verbose -w0 -warnprotos" "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" "-ansi -ansiE % -fullwarn" "+ESlit % +w1" "-Xc % -pvctl,fullmsg" "-h conform % -h msglevel 2" # +do CFLAGS="$ac_save_CFLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_cflags_warn_all=`echo $ac_arg | sed -e 's,.*% *,,'` ; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done + CFLAGS="$ac_save_CFLAGS" + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +fi +echo "$as_me:$LINENO: result: $ac_cv_cflags_warn_all" >&5 +echo "${ECHO_T}$ac_cv_cflags_warn_all" >&6 +case ".$ac_cv_cflags_warn_all" in + .ok|.ok,*) ;; + .|.no|.no,*) + ;; + *) + if echo " $CFLAGS " | grep " $ac_cv_cflags_warn_all " 2>&1 >/dev/null + then { (echo "$as_me:$LINENO: : CFLAGS does contain \$ac_cv_cflags_warn_all") >&5 + (: CFLAGS does contain $ac_cv_cflags_warn_all) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + else { (echo "$as_me:$LINENO: : CFLAGS=\"\$CFLAGS \$ac_cv_cflags_warn_all\"") >&5 + (: CFLAGS="$CFLAGS $ac_cv_cflags_warn_all") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + CFLAGS="$CFLAGS $ac_cv_cflags_warn_all" + fi + ;; +esac + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6 +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_target_alias=$target_alias +test "x$ac_cv_target_alias" = "x" && + ac_cv_target_alias=$ac_cv_host_alias +ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6 +target=$ac_cv_target +target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- +echo "$as_me:$LINENO: checking for library containing strerror" >&5 +echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 +if test "${ac_cv_search_strerror+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_func_search_save_LIBS=$LIBS +ac_cv_search_strerror=no +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char strerror (); +int +main () +{ +strerror (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_strerror="none required" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +if test "$ac_cv_search_strerror" = no; then + for ac_lib in cposix; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char strerror (); +int +main () +{ +strerror (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_strerror="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + done +fi +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +echo "${ECHO_T}$ac_cv_search_strerror" >&6 +if test "$ac_cv_search_strerror" != no; then + test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" + +fi + +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +# Extract the first word of "rm", so it can be a program name with args. +set dummy rm; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_RM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $RM in + [\\/]* | ?:[\\/]*) + ac_cv_path_RM="$RM" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + ;; +esac +fi +RM=$ac_cv_path_RM + +if test -n "$RM"; then + echo "$as_me:$LINENO: result: $RM" >&5 +echo "${ECHO_T}$RM" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "cp", so it can be a program name with args. +set dummy cp; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_CP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $CP in + [\\/]* | ?:[\\/]*) + ac_cv_path_CP="$CP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + ;; +esac +fi +CP=$ac_cv_path_CP + +if test -n "$CP"; then + echo "$as_me:$LINENO: result: $CP" >&5 +echo "${ECHO_T}$CP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Extract the first word of "mv", so it can be a program name with args. +set dummy mv; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_MV+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $MV in + [\\/]* | ?:[\\/]*) + ac_cv_path_MV="$MV" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + ;; +esac +fi +MV=$ac_cv_path_MV + +if test -n "$MV"; then + echo "$as_me:$LINENO: result: $MV" >&5 +echo "${ECHO_T}$MV" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo "$as_me:$LINENO: checking for inline" >&5 +echo $ECHO_N "checking for inline... $ECHO_C" >&6 +if test "${ac_cv_c_inline+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif + +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_inline=$ac_kw; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 +echo "${ECHO_T}$ac_cv_c_inline" >&6 +case $ac_cv_c_inline in + inline | yes) ;; + no) +cat >>confdefs.h <<\_ACEOF +#define inline +_ACEOF + ;; + *) cat >>confdefs.h <<_ACEOF +#define inline $ac_cv_c_inline +_ACEOF + ;; +esac + + + +echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +int +main () +{ +gethostbyname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_nsl_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_nsl_gethostbyname=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +if test $ac_cv_lib_nsl_gethostbyname = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBNSL 1 +_ACEOF + + LIBS="-lnsl $LIBS" + +fi + +echo "$as_me:$LINENO: checking for res_mkquery" >&5 +echo $ECHO_N "checking for res_mkquery... $ECHO_C" >&6 +if test "${ac_cv_func_res_mkquery+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char res_mkquery (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char res_mkquery (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_res_mkquery) || defined (__stub___res_mkquery) +choke me +#else +char (*f) () = res_mkquery; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != res_mkquery; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_res_mkquery=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_res_mkquery=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_res_mkquery" >&5 +echo "${ECHO_T}$ac_cv_func_res_mkquery" >&6 +if test $ac_cv_func_res_mkquery = yes; then + : +else + +echo "$as_me:$LINENO: checking for res_mkquery in -lresolv" >&5 +echo $ECHO_N "checking for res_mkquery in -lresolv... $ECHO_C" >&6 +if test "${ac_cv_lib_resolv_res_mkquery+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lresolv $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char res_mkquery (); +int +main () +{ +res_mkquery (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_resolv_res_mkquery=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_resolv_res_mkquery=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_res_mkquery" >&5 +echo "${ECHO_T}$ac_cv_lib_resolv_res_mkquery" >&6 +if test $ac_cv_lib_resolv_res_mkquery = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBRESOLV 1 +_ACEOF + + LIBS="-lresolv $LIBS" + +fi + +fi + +echo "$as_me:$LINENO: checking for __res_mkquery" >&5 +echo $ECHO_N "checking for __res_mkquery... $ECHO_C" >&6 +if test "${ac_cv_func___res_mkquery+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char __res_mkquery (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char __res_mkquery (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub___res_mkquery) || defined (__stub_____res_mkquery) +choke me +#else +char (*f) () = __res_mkquery; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != __res_mkquery; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func___res_mkquery=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func___res_mkquery=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func___res_mkquery" >&5 +echo "${ECHO_T}$ac_cv_func___res_mkquery" >&6 +if test $ac_cv_func___res_mkquery = yes; then + : +else + +echo "$as_me:$LINENO: checking for __res_mkquery in -lresolv" >&5 +echo $ECHO_N "checking for __res_mkquery in -lresolv... $ECHO_C" >&6 +if test "${ac_cv_lib_resolv___res_mkquery+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lresolv $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char __res_mkquery (); +int +main () +{ +__res_mkquery (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_resolv___res_mkquery=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_resolv___res_mkquery=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_resolv___res_mkquery" >&5 +echo "${ECHO_T}$ac_cv_lib_resolv___res_mkquery" >&6 +if test $ac_cv_lib_resolv___res_mkquery = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBRESOLV 1 +_ACEOF + + LIBS="-lresolv $LIBS" + +fi + +fi + + +echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 +echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char socket (); +int +main () +{ +socket (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_socket=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_socket_socket=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 +if test $ac_cv_lib_socket_socket = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBSOCKET 1 +_ACEOF + + LIBS="-lsocket $LIBS" + +fi + +echo "$as_me:$LINENO: checking for crypt" >&5 +echo $ECHO_N "checking for crypt... $ECHO_C" >&6 +if test "${ac_cv_func_crypt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char crypt (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char crypt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_crypt) || defined (__stub___crypt) +choke me +#else +char (*f) () = crypt; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != crypt; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_crypt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_crypt=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_crypt" >&5 +echo "${ECHO_T}$ac_cv_func_crypt" >&6 +if test $ac_cv_func_crypt = yes; then + : +else + +echo "$as_me:$LINENO: checking for crypt in -ldescrypt" >&5 +echo $ECHO_N "checking for crypt in -ldescrypt... $ECHO_C" >&6 +if test "${ac_cv_lib_descrypt_crypt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldescrypt $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char crypt (); +int +main () +{ +crypt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_descrypt_crypt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_descrypt_crypt=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_descrypt_crypt" >&5 +echo "${ECHO_T}$ac_cv_lib_descrypt_crypt" >&6 +if test $ac_cv_lib_descrypt_crypt = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBDESCRYPT 1 +_ACEOF + + LIBS="-ldescrypt $LIBS" + +else + +echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5 +echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6 +if test "${ac_cv_lib_crypt_crypt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcrypt $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char crypt (); +int +main () +{ +crypt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_crypt_crypt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_crypt_crypt=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5 +echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6 +if test $ac_cv_lib_crypt_crypt = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBCRYPT 1 +_ACEOF + + LIBS="-lcrypt $LIBS" + +fi + +fi + +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + + + +for ac_header in fcntl.h limits.h malloc.h netdb.h netinet/in.h stddef.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + +for ac_header in stdlib.h string.h strings.h sys/file.h sys/ioctl.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + +for ac_header in sys/param.h sys/socket.h sys/time.h syslog.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in utmp.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + + +for ac_header in inttypes.h sys/resource.h errno.h stdlib.h stddef.h getopt.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +echo "$as_me:$LINENO: checking MIN and MAX definition" >&5 +echo $ECHO_N "checking MIN and MAX definition... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#if defined( HAVE_SYS_PARAM_H ) +#include +#ifdef MIN + yes +#endif +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_MINMAX 1 +_ACEOF + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +rm -f conftest* + + + +if test $ac_cv_c_compiler_gnu = yes; then + echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 +echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 +if test "${ac_cv_prog_gcc_traditional+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_pattern="Autoconf.*'x'" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +Autoconf TIOCGETP +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes +else + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +Autoconf TCGETA +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 +echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + + + + + + + +for ac_func in alarm dup2 gethostbyname gethostname getpass gettimeofday +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + + + + +for ac_func in inet_ntoa isascii memmove memset munmap setenv socket +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + + + + +for ac_func in strcasecmp strchr strdup strerror strncasecmp strrchr strtol +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + + + + +for ac_func in strtoul index strerror strtoken strtok inet_addr inet_netof +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + + + + +for ac_func in inet_aton gettimeofday lrand48 sigaction bzero bcmp bcopy +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + + +for ac_func in dn_skipname __dn_skipname getrusage times break +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + +case "$target" in + *-solaris2*) + solaris2="yes" + cat >>confdefs.h <<\_ACEOF +#define OS_SOLARIS2 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define OS_SOLARIS 1 +_ACEOF + + cat >>confdefs.h <<_ACEOF +#define WRITEV_IOV 16 +_ACEOF + + ;; + *-freebsd*) + freebsd="yes" + cat >>confdefs.h <<_ACEOF +#define WRITEV_IOV 32 +_ACEOF + + ;; + *-netbsd*) + cat >>confdefs.h <<_ACEOF +#define WRITEV_IOV 32 +_ACEOF + + ;; + *-openbsd*) + cat >>confdefs.h <<_ACEOF +#define WRITEV_IOV 32 +_ACEOF + + ;; + *-linux*) + linux="yes" + cat >>confdefs.h <<_ACEOF +#define WRITEV_IOV 32 +_ACEOF + + ;; + *aix*) + aix="yes" + cat >>confdefs.h <<\_ACEOF +#define AIX 1 +_ACEOF + + ;; + *-darwin*) + check_hmodules="no" + cat >>confdefs.h <<_ACEOF +#define WRITEV_IOV 32 +_ACEOF + + ;; +esac + + +set_hmodules="disabled" + +if test "$check_hmodules" = "yes"; then + +echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBDL 1 +_ACEOF + + LIBS="-ldl $LIBS" + +fi + + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi + + + + +for ac_func in dlopen dlsym +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + set_hmodules="enabled" +fi +done + + if test "$set_hmodules" = "enabled"; then + cat >>confdefs.h <<\_ACEOF +#define USE_HOOKMODULES 1 +_ACEOF + + MOD_LIBS="-Wl,-export-dynamic" + fi +fi + +echo "$as_me:$LINENO: checking for sys_errlist declaration" >&5 +echo $ECHO_N "checking for sys_errlist declaration... $ECHO_C" >&6 +if test "$cross_compiling" = yes; then + echo "$as_me:$LINENO: result: cross compiling" >&5 +echo "${ECHO_T}cross compiling" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#include +#include +#include +main() +{ + char *s = sys_errlist[0]; + exit(0); +} + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + cat >>confdefs.h <<\_ACEOF +#define SYS_ERRLIST_DECLARED 1 +_ACEOF + +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +save_LIBS="$LIBS" + +echo "$as_me:$LINENO: checking for OpenSSL" >&5 +echo $ECHO_N "checking for OpenSSL... $ECHO_C" >&6 + +if test "X$cf_enable_openssl" != "Xno" ; then + cf_openssl_basedir="" + if test "X$cf_enable_openssl" != "Xauto" && + test "X$cf_enable_openssl" != "Xyes"; then + cf_openssl_basedir="${cf_enable_openssl}" + else + for dirs in /usr/local/ssl /usr/pkg /usr/local /usr/lib /usr/lib/ssl\ + /opt /opt/openssl /usr/local/openssl ; do + if test -f "${dirs}/include/openssl/opensslv.h" ; then + cf_openssl_basedir="${dirs}" + break + fi + done + unset dirs + fi + if test "X$cf_openssl_basedir" != "X" ; then + if test -f "${cf_openssl_basedir}/include/openssl/opensslv.h" ; then + SSL_INCLUDES="-I${cf_openssl_basedir}/include" + SSL_LIBS="-L${cf_openssl_basedir}/lib" + else + cf_openssl_basedir="" + fi + else + if test -f "/usr/include/openssl/opensslv.h" ; then + cf_openssl_basedir="/usr" + fi + fi + if test "X$cf_openssl_basedir" != "X" ; then + LIBS="$save_LIBS $SSL_LIBS -lcrypto" + echo "$as_me:$LINENO: result: $cf_openssl_basedir" >&5 +echo "${ECHO_T}$cf_openssl_basedir" >&6 + cf_enable_openssl="yes" + encryption="enabled" + cat >>confdefs.h <<\_ACEOF +#define HAVE_ENCRYPTION_ON 1 +_ACEOF + + ENCRYPT_SRC="rc4.c dh.c" + + else + echo "$as_me:$LINENO: result: not found. Please check your path." >&5 +echo "${ECHO_T}not found. Please check your path." >&6 + cf_enable_openssl="no" + encryption="disabled" + fi + unset cf_openssl_basedir +else + encryption="disabled" + echo "$as_me:$LINENO: result: disabled" >&5 +echo "${ECHO_T}disabled" >&6 +fi + +unset save_LIBS + + + +if test "$check_sengine" = "yes"; then + engine="select" + if test "$freebsd" = "yes"; then + echo "$as_me:$LINENO: checking for kevent" >&5 +echo $ECHO_N "checking for kevent... $ECHO_C" >&6 +if test "${ac_cv_func_kevent+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char kevent (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char kevent (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_kevent) || defined (__stub___kevent) +choke me +#else +char (*f) () = kevent; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != kevent; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_kevent=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_kevent=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_kevent" >&5 +echo "${ECHO_T}$ac_cv_func_kevent" >&6 +if test $ac_cv_func_kevent = yes; then + engine="kqueue" +fi + + elif test "$solaris2" = "yes"; then + engine="poll" + if test "${ac_cv_header_sys_devpoll_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/devpoll.h" >&5 +echo $ECHO_N "checking for sys/devpoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_devpoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_devpoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_devpoll_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/devpoll.h usability" >&5 +echo $ECHO_N "checking sys/devpoll.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/devpoll.h presence" >&5 +echo $ECHO_N "checking sys/devpoll.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/devpoll.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/devpoll.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/devpoll.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/devpoll.h" >&5 +echo $ECHO_N "checking for sys/devpoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_devpoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_devpoll_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_devpoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_devpoll_h" >&6 + +fi +if test $ac_cv_header_sys_devpoll_h = yes; then + engine="devpoll" +fi + + + elif test "$linux" = "yes"; then + echo "$as_me:$LINENO: checking for poll" >&5 +echo $ECHO_N "checking for poll... $ECHO_C" >&6 +if test "${ac_cv_func_poll+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char poll (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char poll (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_poll) || defined (__stub___poll) +choke me +#else +char (*f) () = poll; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != poll; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_poll=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_poll=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_poll" >&5 +echo "${ECHO_T}$ac_cv_func_poll" >&6 +if test $ac_cv_func_poll = yes; then + engine="poll" +fi + + if test "${ac_cv_header_sys_epoll_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/epoll.h" >&5 +echo $ECHO_N "checking for sys/epoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_epoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_epoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_epoll_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/epoll.h usability" >&5 +echo $ECHO_N "checking sys/epoll.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/epoll.h presence" >&5 +echo $ECHO_N "checking sys/epoll.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/epoll.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/epoll.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/epoll.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/epoll.h" >&5 +echo $ECHO_N "checking for sys/epoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_epoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_epoll_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_epoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_epoll_h" >&6 + +fi +if test $ac_cv_header_sys_epoll_h = yes; then + HAVE_EPOLL_H=yes +else + HAVE_EPOLL_H=no +fi + + + echo "$as_me:$LINENO: checking for epoll_create in -lepoll" >&5 +echo $ECHO_N "checking for epoll_create in -lepoll... $ECHO_C" >&6 +if test "${ac_cv_lib_epoll_epoll_create+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lepoll $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char epoll_create (); +int +main () +{ +epoll_create (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_epoll_epoll_create=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_epoll_epoll_create=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_epoll_epoll_create" >&5 +echo "${ECHO_T}$ac_cv_lib_epoll_epoll_create" >&6 +if test $ac_cv_lib_epoll_epoll_create = yes; then + LIBS="$LIBS -lepoll"; have_epoll_lib="yes"; engine="epoll" +else + have_epoll_lib="no" +fi + + if test "$HAVE_EPOLL_H $have_epoll_lib" = "yes no"; then + echo "$as_me:$LINENO: checking for epoll_create without -lepoll" >&5 +echo $ECHO_N "checking for epoll_create without -lepoll... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #include + #include + #include + + #include + + _syscall1(int, epoll_create, int, size) + + int main(int argc, char **argv) { return epoll_create(5) < 1; } + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + have_epoll_lib="yes" +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +have_epoll_lib="no" +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + echo "$as_me:$LINENO: result: $have_epoll_lib" >&5 +echo "${ECHO_T}$have_epoll_lib" >&6 + if test "$have_epoll_lib" = "yes"; then + cat >>confdefs.h <<\_ACEOF +#define NEED_EPOLL_DEFS 1 +_ACEOF + + fi + fi + if test "$HAVE_EPOLL_H $have_epoll_lib" = "yes yes"; then + engine="epoll"; + fi + else + echo "$as_me:$LINENO: checking for poll" >&5 +echo $ECHO_N "checking for poll... $ECHO_C" >&6 +if test "${ac_cv_func_poll+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char poll (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char poll (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_poll) || defined (__stub___poll) +choke me +#else +char (*f) () = poll; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != poll; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_poll=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_poll=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_poll" >&5 +echo "${ECHO_T}$ac_cv_func_poll" >&6 +if test $ac_cv_func_poll = yes; then + engine="poll" +fi + + fi +elif test "$check_sengine" = "kqueue"; then + echo "$as_me:$LINENO: checking for kevent" >&5 +echo $ECHO_N "checking for kevent... $ECHO_C" >&6 +if test "${ac_cv_func_kevent+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char kevent (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char kevent (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_kevent) || defined (__stub___kevent) +choke me +#else +char (*f) () = kevent; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != kevent; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_kevent=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_kevent=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_kevent" >&5 +echo "${ECHO_T}$ac_cv_func_kevent" >&6 +if test $ac_cv_func_kevent = yes; then + engine="kqueue" +fi + + if test "X$engine" = "X"; then + { echo "$as_me:$LINENO: " >&5 +echo "$as_me: " >&6;} + { echo "$as_me:$LINENO: kqueue not supported on this platform!" >&5 +echo "$as_me: kqueue not supported on this platform!" >&6;} + { { echo "$as_me:$LINENO: error: " >&5 +echo "$as_me: error: " >&2;} + { (exit 1); exit 1; }; } + fi + { echo "$as_me:$LINENO: setting socketengine type to kqueue" >&5 +echo "$as_me: setting socketengine type to kqueue" >&6;} +elif test "$check_sengine" = "poll"; then + echo "$as_me:$LINENO: checking for poll" >&5 +echo $ECHO_N "checking for poll... $ECHO_C" >&6 +if test "${ac_cv_func_poll+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char poll (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char poll (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_poll) || defined (__stub___poll) +choke me +#else +char (*f) () = poll; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != poll; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_poll=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_poll=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_poll" >&5 +echo "${ECHO_T}$ac_cv_func_poll" >&6 +if test $ac_cv_func_poll = yes; then + engine="poll" +fi + + if test "X$engine" = "X"; then + { echo "$as_me:$LINENO: " >&5 +echo "$as_me: " >&6;} + { echo "$as_me:$LINENO: poll not supported on this platform!" >&5 +echo "$as_me: poll not supported on this platform!" >&6;} + { { echo "$as_me:$LINENO: error: " >&5 +echo "$as_me: error: " >&2;} + { (exit 1); exit 1; }; } + fi + { echo "$as_me:$LINENO: setting socketengine type to poll" >&5 +echo "$as_me: setting socketengine type to poll" >&6;} +elif test "$check_sengine" = "devpoll"; then + if test "${ac_cv_header_sys_devpoll_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/devpoll.h" >&5 +echo $ECHO_N "checking for sys/devpoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_devpoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_devpoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_devpoll_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/devpoll.h usability" >&5 +echo $ECHO_N "checking sys/devpoll.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/devpoll.h presence" >&5 +echo $ECHO_N "checking sys/devpoll.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/devpoll.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/devpoll.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/devpoll.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/devpoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/devpoll.h" >&5 +echo $ECHO_N "checking for sys/devpoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_devpoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_devpoll_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_devpoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_devpoll_h" >&6 + +fi +if test $ac_cv_header_sys_devpoll_h = yes; then + engine="devpoll" +fi + + + if test "X$engine" = "X"; then + { echo "$as_me:$LINENO: " >&5 +echo "$as_me: " >&6;} + { echo "$as_me:$LINENO: /dev/poll not supported on this system" >&5 +echo "$as_me: /dev/poll not supported on this system" >&6;} + { { echo "$as_me:$LINENO: error: " >&5 +echo "$as_me: error: " >&2;} + { (exit 1); exit 1; }; } + fi + { echo "$as_me:$LINENO: setting socketengine to devpoll" >&5 +echo "$as_me: setting socketengine to devpoll" >&6;} +elif test "$check_sengine" = "epoll"; then + if test "${ac_cv_header_sys_epoll_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/epoll.h" >&5 +echo $ECHO_N "checking for sys/epoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_epoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_epoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_epoll_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/epoll.h usability" >&5 +echo $ECHO_N "checking sys/epoll.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/epoll.h presence" >&5 +echo $ECHO_N "checking sys/epoll.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/epoll.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/epoll.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/epoll.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/epoll.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/epoll.h" >&5 +echo $ECHO_N "checking for sys/epoll.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_epoll_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_epoll_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_epoll_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_epoll_h" >&6 + +fi +if test $ac_cv_header_sys_epoll_h = yes; then + HAVE_EPOLL_H=yes +else + HAVE_EPOLL_H=no +fi + + + echo "$as_me:$LINENO: checking for epoll_create in -lepoll" >&5 +echo $ECHO_N "checking for epoll_create in -lepoll... $ECHO_C" >&6 +if test "${ac_cv_lib_epoll_epoll_create+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lepoll $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char epoll_create (); +int +main () +{ +epoll_create (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_epoll_epoll_create=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_epoll_epoll_create=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_epoll_epoll_create" >&5 +echo "${ECHO_T}$ac_cv_lib_epoll_epoll_create" >&6 +if test $ac_cv_lib_epoll_epoll_create = yes; then + LIBS="$LIBS -lepoll"; have_epoll_lib="yes"; engine="epoll" +else + have_epoll_lib="no" +fi + + if test "$HAVE_EPOLL_H $have_epoll_lib" = "yes no"; then + echo "$as_me:$LINENO: checking for epoll_create without -lepoll" >&5 +echo $ECHO_N "checking for epoll_create without -lepoll... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #include + #include + #include + + #include + + _syscall1(int, epoll_create, int, size) + + int main(int argc, char **argv) { return epoll_create(5) < 1; } + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + have_epoll_lib="yes" +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +have_epoll_lib="no" +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + echo "$as_me:$LINENO: result: $have_epoll_lib" >&5 +echo "${ECHO_T}$have_epoll_lib" >&6 + if test "$have_epoll_lib" = "yes"; then + cat >>confdefs.h <<\_ACEOF +#define NEED_EPOLL_DEFS 1 +_ACEOF + + fi + fi + if test "$HAVE_EPOLL_H $have_epoll_lib" != "yes yes"; then + { echo "$as_me:$LINENO: " >&5 +echo "$as_me: " >&6;} + { { echo "$as_me:$LINENO: error: epoll is not supported on this machine" >&5 +echo "$as_me: error: epoll is not supported on this machine" >&2;} + { (exit 1); exit 1; }; } + { { echo "$as_me:$LINENO: error: " >&5 +echo "$as_me: error: " >&2;} + { (exit 1); exit 1; }; } + fi + { echo "$as_me:$LINENO: setting socketengine type to epoll" >&5 +echo "$as_me: setting socketengine type to epoll" >&6;} + engine="epoll"; +elif test "$check_sengine" = "select"; then + { echo "$as_me:$LINENO: setting socketengine type to select.. for some stupid reason" >&5 +echo "$as_me: setting socketengine type to select.. for some stupid reason" >&6;} + engine="select" +else + { echo "$as_me:$LINENO: " >&5 +echo "$as_me: " >&6;} + { echo "$as_me:$LINENO: socket engine type incorrect!" >&5 +echo "$as_me: socket engine type incorrect!" >&6;} + { { echo "$as_me:$LINENO: error: " >&5 +echo "$as_me: error: " >&2;} + { (exit 1); exit 1; }; } +fi + +SENGINE="socketengine_$engine.c" + +if test $engine = "select"; then + echo "$as_me:$LINENO: checking to see if FD_SETSIZE is broken" >&5 +echo $ECHO_N "checking to see if FD_SETSIZE is broken... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + echo "$as_me:$LINENO: result: can't tell" >&5 +echo "${ECHO_T}can't tell" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #define FD_SETSIZE 666 + #include + #include + + int main() + { + if(FD_SETSIZE != 666) + exit(1); + exit(0); + } + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) + + echo "$as_me:$LINENO: result: YES" >&5 +echo "${ECHO_T}YES" >&6 + { echo "$as_me:$LINENO: WARNING: FD_SETSIZE is hard set by your operating system" >&5 +echo "$as_me: WARNING: FD_SETSIZE is hard set by your operating system" >&2;} + { echo "$as_me:$LINENO: WARNING: MAXCONNECTIONS must be no higher than the hardwired FD_SETSIZE" >&5 +echo "$as_me: WARNING: MAXCONNECTIONS must be no higher than the hardwired FD_SETSIZE" >&2;} + cat >>confdefs.h <<\_ACEOF +#define BROKEN_FD_SETSIZE 1 +_ACEOF + + broken_fd_setsize="yes" + +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi + +if test "$solaris2" != "yes" && test "$aix" != "yes" && + test "$set_hmodules" = "enabled"; then + LIBS="$LIBS $MOD_LIBS" +fi + +if test "$check_maxconnections" = "auto"; then + + echo "$as_me:$LINENO: checking Maximum file descriptors" >&5 +echo $ECHO_N "checking Maximum file descriptors... $ECHO_C" >&6; + if test "${maxconnections+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #include + #include + #include + #include + #ifdef RLIMIT_FDMAX + #define RLIMIT_FD_MAX RLIMIT_FDMAX + #else + #ifdef RLIMIT_NOFILE + #define RLIMIT_FD_MAX RLIMIT_NOFILE + #else + #ifdef RLIMIT_OPEN_MAX + #define RLIMIT_FD_MAX RLIMIT_OPEN_MAX + #else + #undef RLIMIT_FD_MAX + #endif + #endif + #endif + + + int main() + { + #ifndef BROKEN_FD_SETSIZE + + #ifdef RLIMIT_FD_MAX + struct rlimit limit; + + if(!getrlimit(RLIMIT_FD_MAX, &limit)) + { + if(limit.rlim_max > 32768) + printf("32768"); + else + printf("%ld", (long) limit.rlim_max); + } + else + #endif + printf("256"); + + #else + printf("%d", FD_SETSIZE); + #endif + return 0; + } + + +_ACEOF + + $CC -o conftest conftest.c >/dev/null 2>&1 + maxconnections=`./conftest` + echo "$as_me:$LINENO: result: $maxconnections" >&5 +echo "${ECHO_T}$maxconnections" >&6 + $RM -f conftest conftest.c + +fi + + cat >>confdefs.h <<_ACEOF +#define MAXCONNECTIONS ${maxconnections} +_ACEOF + + +else + maxconnections=$check_maxconnections + cat >>confdefs.h <<_ACEOF +#define MAXCONNECTIONS ${maxconnections} +_ACEOF + +fi + +if test "$engine" = "select" && test "$broken_fd_setsize" != "yes"; then + CFLAGS="$CFLAGS -DFD_SETSIZE=$maxconnections" +fi + +if test $prefix = NONE; then + prefix=${HOME}/ircd +fi + +INSTALL_DIR="${prefix}" + + + + + + + + ac_config_files="$ac_config_files Makefile src/Makefile tools/Makefile doc/Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.57, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "tools/Makefile" ) CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; + "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "include/setup.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/setup.h" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@PACKAGE@,$PACKAGE,;t t +s,@VERSION@,$VERSION,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@target@,$target,;t t +s,@target_cpu@,$target_cpu,;t t +s,@target_vendor@,$target_vendor,;t t +s,@target_os@,$target_os,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@RM@,$RM,;t t +s,@CP@,$CP,;t t +s,@MV@,$MV,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@ENCRYPT_SRC@,$ENCRYPT_SRC,;t t +s,@SSL_INCLUDES@,$SSL_INCLUDES,;t t +s,@SSL_LIBS@,$SSL_LIBS,;t t +s,@SENGINE@,$SENGINE,;t t +s,@INSTALL_DIR@,$INSTALL_DIR,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_HEADER section. +# + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' +ac_dC=' ' +ac_dD=',;t' +# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='$,\1#\2define\3' +ac_uC=' ' +ac_uD=',;t' + +for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + +_ACEOF + +# Transform confdefs.h into two sed scripts, `conftest.defines' and +# `conftest.undefs', that substitutes the proper values into +# config.h.in to produce config.h. The first handles `#define' +# templates, and the second `#undef' templates. +# And first: Protect against being on the right side of a sed subst in +# config.status. Protect against being in an unquoted here document +# in config.status. +rm -f conftest.defines conftest.undefs +# Using a here document instead of a string reduces the quoting nightmare. +# Putting comments in sed scripts is not portable. +# +# `end' is used to avoid that the second main sed command (meant for +# 0-ary CPP macros) applies to n-ary macro definitions. +# See the Autoconf documentation for `clear'. +cat >confdef2sed.sed <<\_ACEOF +s/[\\&,]/\\&/g +s,[\\$`],\\&,g +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +t end +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +: end +_ACEOF +# If some macros were called several times there might be several times +# the same #defines, which is useless. Nevertheless, we may not want to +# sort them, since we want the *last* AC-DEFINE to be honored. +uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +rm -f confdef2sed.sed + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >>conftest.undefs <<\_ACEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +_ACEOF + +# Break up conftest.defines because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +echo ' :' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.defines >/dev/null +do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines +echo ' fi # grep' >>$CONFIG_STATUS +echo >>$CONFIG_STATUS + +# Break up conftest.undefs because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.undefs >/dev/null +do + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs +done +rm -f conftest.undefs + +cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h + else + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file + fi + else + cat $tmp/config.h + rm -f $tmp/config.h + fi +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + + +echo configuring zlib... +( + cd zlib + ./configure + cd .. +) + +echo "" +echo " ******* Bahamut Configuration Settings *******" +echo " System Build Type: $target" +echo " Socket Engine Type: $engine" +echo " Encryption: $encryption" +echo " Loadable Modules: $set_hmodules" +echo " Maximum Connections: $maxconnections" +echo " Install Directory: $prefix" +echo "" diff --git a/configure.in b/configure.in new file mode 100644 index 0000000..547d900 --- /dev/null +++ b/configure.in @@ -0,0 +1,569 @@ +dnl Process this file with autoconf to produce a configure script. +dnl rewritten for my own personal sanity, and for more extensive +dnl checks - feb04 -epi + +AC_INIT + +AC_CONFIG_HEADER(include/setup.h) + +PACKAGE=bahamut-release +VERSION=1.8 +AC_SUBST(PACKAGE) +AC_SUBST(VERSION) + +# autoheader templates + +AH_TEMPLATE([BROKEN_FD_SETSIZE],[If on a system with a broken FD_SETSIZE]) +AH_TEMPLATE([HAVE_ENCRYPTION_ON],[If we support encryption]) +AH_TEMPLATE([HAVE_MINMAX],[If we have the MIN and MAX macros]) +AH_TEMPLATE([OS_SOLARIS2],[If we're running on Solaris]) +AH_TEMPLATE([OS_SOLARIS],[Not quite sure why we have two of these]) +AH_TEMPLATE([SYS_ERRLIST_DECLARED],[If the sys_errlist array is defined]) +AH_TEMPLATE([USE_HOOKMODULES],[Do we support loadable modules]) +AH_TEMPLATE([MAXCONNECTIONS],[Maximum Connections we allow]) +AH_TEMPLATE([NEED_EPOLL_DEFS],[epoll behavior]) +AH_TEMPLATE([AIX],[AIX support]) +AH_TEMPLATE([WRITEV_IOV],[Maxmimum number of iovecs supported by writev()]) + +dnl Put our options of here for ease of reading. + +AC_ARG_ENABLE(hookmodules, +[ --disable-hookmodules disable support for loadable hook modules],, +[ check_hmodules="yes" ]) + +AC_ARG_ENABLE(openssl, +[ --enable-openssl[=DIR] Enable OpenSSL support (DIR optional). + --disable-openssl Disable OpenSSL support. ], +[ cf_enable_openssl=$enableval ], +[ cf_enable_openssl="auto" ]) + +AC_ARG_WITH(socketengine, +[ --with-socketengine=TYPE Set the socketengine type. Choices are: + kqueue poll select ], +[ check_sengine=$withval ], +[ check_sengine="yes" ]) +AC_ARG_WITH(maxconnections, +[ --with-maxconnections=NUMBER Set the maximum number of sockets.], +[ check_maxconnections=$withval ], +[ check_maxconnections="auto" ]) + +dnl ----------------------------------------------------------------- +dnl this adds our check for proper warnings checks +dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_warn_all.html +dnl handy. + +AC_DEFUN([AX_CFLAGS_WARN_ALL],[dnl +AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl +AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_warn_all])dnl +AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings], +VAR,[VAR="no, unknown" + AC_LANG_SAVE + AC_LANG_C + ac_save_[]FLAGS="$[]FLAGS" +for ac_arg dnl +in "-pedantic % -Wall" dnl GCC + "-xstrconst % -v" dnl Solaris C + "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix + "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX + "-ansi -ansiE % -fullwarn" dnl IRIX + "+ESlit % +w1" dnl HP-UX C + "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10) + "-h conform % -h msglevel 2" dnl Cray C (Unicos) + # +do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` + AC_TRY_COMPILE([],[return 0;], + [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) +done + FLAGS="$ac_save_[]FLAGS" + AC_LANG_RESTORE +]) +case ".$VAR" in + .ok|.ok,*) m4_ifvaln($3,$3) ;; + .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[ + AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"]) + m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;; + *) m4_ifvaln($3,$3,[ + if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null + then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) + else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) + m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" + fi ]) ;; +esac +AS_VAR_POPDEF([VAR])dnl +AS_VAR_POPDEF([FLAGS])dnl +]) + +dnl the only difference - the LANG selection... and the default FLAGS + +AC_DEFUN([AX_CXXFLAGS_WARN_ALL],[dnl +AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl +AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_warn_all])dnl +AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings], +VAR,[VAR="no, unknown" + AC_LANG_SAVE + AC_LANG_CXX + ac_save_[]FLAGS="$[]FLAGS" +for ac_arg dnl +in "-pedantic % -Wall" dnl GCC + "-xstrconst % -v" dnl Solaris C + "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix + "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX + "-ansi -ansiE % -fullwarn" dnl IRIX + "+ESlit % +w1" dnl HP-UX C + "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10) + "-h conform % -h msglevel 2" dnl Cray C (Unicos) + # +do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` + AC_TRY_COMPILE([],[return 0;], + [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) +done + FLAGS="$ac_save_[]FLAGS" + AC_LANG_RESTORE +]) +case ".$VAR" in + .ok|.ok,*) m4_ifvaln($3,$3) ;; + .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[ + AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"]) + m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;; + *) m4_ifvaln($3,$3,[ + if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null + then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) + else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) + m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" + fi ]) ;; +esac +AS_VAR_POPDEF([VAR])dnl +AS_VAR_POPDEF([FLAGS])dnl +]) + +dnl implementation tactics: +dnl the for-argument contains a list of options. The first part of +dnl these does only exist to detect the compiler - usually it is +dnl a global option to enable -ansi or -extrawarnings. All other +dnl compilers will fail about it. That was needed since a lot of +dnl compilers will give false positives for some option-syntax +dnl like -Woption or -Xoption as they think of it is a pass-through +dnl to later compile stages or something. The "%" is used as a +dnl delimimiter. A non-option comment can be given after "%%" marks. + +dnl ------------------------------------------------------------------- + +dnl Checks for programs. +AC_PROG_CC +AX_CFLAGS_WARN_ALL +AC_CANONICAL_SYSTEM +AC_ISC_POSIX +AC_PROG_MAKE_SET +AC_PATH_PROG(RM, rm) +AC_PATH_PROG(CP, cp) +AC_PATH_PROG(MV, mv) +AC_PROG_INSTALL +AC_C_INLINE + +dnl Checks for libraries. +dnl Replace `main' with a function in -lnsl: +AC_CHECK_LIB(nsl, gethostbyname) +AC_CHECK_FUNC(res_mkquery,, AC_CHECK_LIB(resolv, res_mkquery)) +AC_CHECK_FUNC(__res_mkquery,, AC_CHECK_LIB(resolv, __res_mkquery)) +AC_CHECK_LIB(socket, socket) +AC_CHECK_FUNC(crypt,, AC_CHECK_LIB(descrypt, crypt,,AC_CHECK_LIB(crypt, crypt,,))) + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS([fcntl.h limits.h malloc.h netdb.h netinet/in.h stddef.h]) +AC_CHECK_HEADERS([stdlib.h string.h strings.h sys/file.h sys/ioctl.h]) +AC_CHECK_HEADERS([sys/param.h sys/socket.h sys/time.h syslog.h unistd.h]) +AC_CHECK_HEADERS([utmp.h]) +AC_CHECK_HEADERS(inttypes.h sys/resource.h errno.h stdlib.h stddef.h getopt.h) +AC_MSG_CHECKING(MIN and MAX definition) +AC_EGREP_CPP(yes, +[ +#if defined( HAVE_SYS_PARAM_H ) +#include +#ifdef MIN + yes +#endif +#endif +], AC_DEFINE(HAVE_MINMAX) AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) + + +dnl Checks for library functions. +AC_PROG_GCC_TRADITIONAL +AC_CHECK_FUNCS([alarm dup2 gethostbyname gethostname getpass gettimeofday]) +AC_CHECK_FUNCS([inet_ntoa isascii memmove memset munmap setenv socket]) +AC_CHECK_FUNCS([strcasecmp strchr strdup strerror strncasecmp strrchr strtol]) +AC_CHECK_FUNCS([strtoul index strerror strtoken strtok inet_addr inet_netof]) +AC_CHECK_FUNCS([inet_aton gettimeofday lrand48 sigaction bzero bcmp bcopy]) +AC_CHECK_FUNCS([dn_skipname __dn_skipname getrusage times break]) + +dnl check for various OSes + +case "$target" in + *-solaris2*) + solaris2="yes" + AC_DEFINE(OS_SOLARIS2) + AC_DEFINE(OS_SOLARIS) + AC_DEFINE_UNQUOTED(WRITEV_IOV, 16) + ;; + *-freebsd*) + freebsd="yes" + AC_DEFINE_UNQUOTED(WRITEV_IOV, 32) + ;; + *-netbsd*) + AC_DEFINE_UNQUOTED(WRITEV_IOV, 32) + ;; + *-openbsd*) + AC_DEFINE_UNQUOTED(WRITEV_IOV, 32) + ;; + *-linux*) + linux="yes" + AC_DEFINE_UNQUOTED(WRITEV_IOV, 32) + ;; + *aix*) + aix="yes" + AC_DEFINE(AIX) + ;; + *-darwin*) + check_hmodules="no" + AC_DEFINE_UNQUOTED(WRITEV_IOV, 32) + ;; +esac + +dnl Checks for loadable hook module support + +set_hmodules="disabled" + +if test "$check_hmodules" = "yes"; then + AC_CHECK_LIB(dl, dlopen) + AC_CHECK_HEADER(dlfcn.h) + AC_CHECK_FUNCS(dlopen dlsym, [set_hmodules="enabled"]) + if test "$set_hmodules" = "enabled"; then + AC_DEFINE(USE_HOOKMODULES) + MOD_LIBS="-Wl,-export-dynamic" + fi +fi + +dnl Check for sys_errlist +dnl Stolen from BitchX +AC_MSG_CHECKING(for sys_errlist declaration) +AC_TRY_RUN([ +#include +#include +#include +main() +{ + char *s = sys_errlist[0]; + exit(0); +} +], + AC_MSG_RESULT(yes) + AC_DEFINE(SYS_ERRLIST_DECLARED), + AC_MSG_RESULT(no), AC_MSG_RESULT(cross compiling)) + +dnl Openssl checks - combination of our old way and the hybrid7 method + +save_LIBS="$LIBS" + +AC_MSG_CHECKING(for OpenSSL) + +if test "X$cf_enable_openssl" != "Xno" ; then + cf_openssl_basedir="" + if test "X$cf_enable_openssl" != "Xauto" && + test "X$cf_enable_openssl" != "Xyes"; then + dnl Support for --enable-openssl=/some/place + cf_openssl_basedir="${cf_enable_openssl}" + else + dnl Do the auto-probe here. Check some common directory paths. + for dirs in /usr/local/ssl /usr/pkg /usr/local /usr/lib /usr/lib/ssl\ + /opt /opt/openssl /usr/local/openssl ; do + if test -f "${dirs}/include/openssl/opensslv.h" ; then + cf_openssl_basedir="${dirs}" + break + fi + done + unset dirs + fi + dnl Now check cf_openssl_found to see if we found anything. + if test "X$cf_openssl_basedir" != "X" ; then + if test -f "${cf_openssl_basedir}/include/openssl/opensslv.h" ; then + SSL_INCLUDES="-I${cf_openssl_basedir}/include" + SSL_LIBS="-L${cf_openssl_basedir}/lib" + else + dnl OpenSSL wasn't found in the directory specified. Naughty + dnl administrator... + cf_openssl_basedir="" + fi + else + dnl Check for stock FreeBSD 4.x and 5.x systems, since their files + dnl are in /usr/include and /usr/lib. In this case, we don't want to + dnl change INCLUDES or LIBS, but still want to enable OpenSSL. + dnl We can't do this check above, because some people want two versions + dnl of OpenSSL installed (stock FreeBSD 4.x/5.x and /usr/local/ssl) + dnl and they want /usr/local/ssl to have preference. + if test -f "/usr/include/openssl/opensslv.h" ; then + cf_openssl_basedir="/usr" + fi + fi + dnl If we have a basedir defined, then everything is okay. Otherwise, + dnl we have a problem. + if test "X$cf_openssl_basedir" != "X" ; then + LIBS="$save_LIBS $SSL_LIBS -lcrypto" + AC_MSG_RESULT($cf_openssl_basedir) + cf_enable_openssl="yes" + encryption="enabled" + AC_DEFINE(HAVE_ENCRYPTION_ON) + ENCRYPT_SRC="rc4.c dh.c" + AC_SUBST(ENCRYPT_SRC) + else + AC_MSG_RESULT(not found. Please check your path.) + cf_enable_openssl="no" + encryption="disabled" + fi + unset cf_openssl_basedir +else + dnl If --disable-openssl was specified + encryption="disabled" + AC_MSG_RESULT(disabled) +fi + +unset save_LIBS + +dnl end of openssl library test + +dnl once we add epoll and /dev/poll support, these will be +dnl updated with the appropriate checks + +if test "$check_sengine" = "yes"; then + engine="select" + if test "$freebsd" = "yes"; then + AC_CHECK_FUNC(kevent, [ engine="kqueue" ], ) + elif test "$solaris2" = "yes"; then + engine="poll" + AC_CHECK_HEADER(sys/devpoll.h, engine="devpoll", ) + elif test "$linux" = "yes"; then + AC_CHECK_FUNC(poll, [ engine="poll" ], ) + AC_CHECK_HEADER(sys/epoll.h, HAVE_EPOLL_H=yes, HAVE_EPOLL_H=no) + AC_CHECK_LIB(epoll, epoll_create, + [LIBS="$LIBS -lepoll"; have_epoll_lib="yes"; engine="epoll"], + have_epoll_lib="no") + if test "$HAVE_EPOLL_H $have_epoll_lib" = "yes no"; then + AC_MSG_CHECKING(for epoll_create [without -lepoll]) + AC_TRY_RUN([ + #include + #include + #include + + #include + + _syscall1(int, epoll_create, int, size) + + int main(int argc, char **argv) { return epoll_create(5) < 1; } + ], + have_epoll_lib="yes", have_epoll_lib="no") + AC_MSG_RESULT($have_epoll_lib) + if test "$have_epoll_lib" = "yes"; then + AC_DEFINE(NEED_EPOLL_DEFS) + fi + fi + if test "$HAVE_EPOLL_H $have_epoll_lib" = "yes yes"; then + engine="epoll"; + fi + else + AC_CHECK_FUNC(poll, [ engine="poll"], ) + fi +elif test "$check_sengine" = "kqueue"; then + AC_CHECK_FUNC(kevent, [ engine="kqueue" ], ) + if test "X$engine" = "X"; then + AC_MSG_NOTICE() + AC_MSG_NOTICE(kqueue not supported on this platform!) + AC_MSG_ERROR() + fi + AC_MSG_NOTICE(setting socketengine type to kqueue) +elif test "$check_sengine" = "poll"; then + AC_CHECK_FUNC(poll, [ engine="poll" ], ) + if test "X$engine" = "X"; then + AC_MSG_NOTICE() + AC_MSG_NOTICE(poll not supported on this platform!) + AC_MSG_ERROR() + fi + AC_MSG_NOTICE(setting socketengine type to poll) +elif test "$check_sengine" = "devpoll"; then + AC_CHECK_HEADER(sys/devpoll.h, engine="devpoll", ) + if test "X$engine" = "X"; then + AC_MSG_NOTICE() + AC_MSG_NOTICE(/dev/poll not supported on this system) + AC_MSG_ERROR() + fi + AC_MSG_NOTICE(setting socketengine to devpoll) +elif test "$check_sengine" = "epoll"; then + AC_CHECK_HEADER(sys/epoll.h, HAVE_EPOLL_H=yes, HAVE_EPOLL_H=no) + AC_CHECK_LIB(epoll, epoll_create, + [LIBS="$LIBS -lepoll"; have_epoll_lib="yes"; engine="epoll"], + have_epoll_lib="no") + if test "$HAVE_EPOLL_H $have_epoll_lib" = "yes no"; then + AC_MSG_CHECKING(for epoll_create [without -lepoll]) + AC_TRY_RUN([ + #include + #include + #include + + #include + + _syscall1(int, epoll_create, int, size) + + int main(int argc, char **argv) { return epoll_create(5) < 1; } + ], + have_epoll_lib="yes", have_epoll_lib="no") + AC_MSG_RESULT($have_epoll_lib) + if test "$have_epoll_lib" = "yes"; then + AC_DEFINE(NEED_EPOLL_DEFS) + fi + fi + if test "$HAVE_EPOLL_H $have_epoll_lib" != "yes yes"; then + AC_MSG_NOTICE() + AC_MSG_ERROR(epoll is not supported on this machine) + AC_MSG_ERROR() + fi + AC_MSG_NOTICE(setting socketengine type to epoll) + engine="epoll"; +elif test "$check_sengine" = "select"; then + AC_MSG_NOTICE(setting socketengine type to select.. for some stupid reason) + engine="select" +else + AC_MSG_NOTICE() + AC_MSG_NOTICE(socket engine type incorrect!) + AC_MSG_ERROR() +fi + +SENGINE="socketengine_$engine.c" + +dnl Check to see if we have a broken FD_SETSIZE +if test $engine = "select"; then + AC_MSG_CHECKING(to see if FD_SETSIZE is broken) + AC_TRY_RUN([ + #define FD_SETSIZE 666 + #include + #include + + int main() + { + if(FD_SETSIZE != 666) + exit(1); + exit(0); + } + ], + AC_MSG_RESULT(no), + [ + AC_MSG_RESULT(YES) + AC_MSG_WARN(FD_SETSIZE is hard set by your operating system) + AC_MSG_WARN(MAXCONNECTIONS must be no higher than the hardwired FD_SETSIZE) + AC_DEFINE(BROKEN_FD_SETSIZE) + broken_fd_setsize="yes" + ], + AC_MSG_RESULT(can't tell)) +fi + +if test "$solaris2" != "yes" && test "$aix" != "yes" && + test "$set_hmodules" = "enabled"; then + LIBS="$LIBS $MOD_LIBS" +fi + +if test "$check_maxconnections" = "auto"; then + + AC_MSG_CHECKING(Maximum file descriptors); + AC_CACHE_VAL(maxconnections, +[ + +AC_LANG_CONFTEST( + [AC_LANG_SOURCE([[ + #include + #include + #include + #include + #ifdef RLIMIT_FDMAX + #define RLIMIT_FD_MAX RLIMIT_FDMAX + #else + #ifdef RLIMIT_NOFILE + #define RLIMIT_FD_MAX RLIMIT_NOFILE + #else + #ifdef RLIMIT_OPEN_MAX + #define RLIMIT_FD_MAX RLIMIT_OPEN_MAX + #else + #undef RLIMIT_FD_MAX + #endif + #endif + #endif + + + int main() + { + #ifndef BROKEN_FD_SETSIZE + + #ifdef RLIMIT_FD_MAX + struct rlimit limit; + + if(!getrlimit(RLIMIT_FD_MAX, &limit)) + { + if(limit.rlim_max > 32768) + printf("32768"); + else + printf("%ld", (long) limit.rlim_max); + } + else + #endif + printf("256"); + + #else + printf("%d", FD_SETSIZE); + #endif + return 0; + } + ]]) +]) + + $CC -o conftest conftest.c >/dev/null 2>&1 + maxconnections=`./conftest` + AC_MSG_RESULT($maxconnections) + $RM -f conftest conftest.c +]) + AC_DEFINE_UNQUOTED(MAXCONNECTIONS, ${maxconnections}) + +else + maxconnections=$check_maxconnections + AC_DEFINE_UNQUOTED(MAXCONNECTIONS, ${maxconnections}) +fi + +if test "$engine" = "select" && test "$broken_fd_setsize" != "yes"; then + CFLAGS="$CFLAGS -DFD_SETSIZE=$maxconnections" +fi + +if test $prefix = NONE; then + prefix=${HOME}/ircd +fi + +INSTALL_DIR="${prefix}" + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LIBS) +AC_SUBST(LIBS) +AC_SUBST(SENGINE) +AC_SUBST(INSTALL_DIR) + +AC_OUTPUT(Makefile src/Makefile tools/Makefile doc/Makefile) + +echo configuring zlib... +( + cd zlib + ./configure + cd .. +) + +echo "" +echo " ******* Bahamut Configuration Settings *******" +echo " System Build Type: $target" +echo " Socket Engine Type: $engine" +echo " Encryption: $encryption" +echo " Loadable Modules: $set_hmodules" +echo " Maximum Connections: $maxconnections" +echo " Install Directory: $prefix" +echo "" diff --git a/doc/Bahamut-team b/doc/Bahamut-team new file mode 100644 index 0000000..951b4eb --- /dev/null +++ b/doc/Bahamut-team @@ -0,0 +1,45 @@ +Bahamut was taken on by a group of loosely knit coders that decided that +Dreamforge just was eating up too much CPU to handle DALnet's growing user +base. Originally starting out as the DFhybrid project, it slowly grew +into the Bahamut project as the peices started falling together. + +Bahamut is based upon the hybrid IRCd, developed for EFnet, and we most +surely wouldn't be where we are today without the dedication of the coders +that developed that IRCd. The Hybrid team is outlined in the file +included with this distribution, in doc/Hybrid-team. Please look over +that file, those people are as much to credit for this as the people +listed here. + +People who have supported the Bahamut project with code, support, or +testing are, in alphabetical order: + +Aaron Wiebe epiphani@dal.net +Chip Norkus wd@dal.net +David Friedman driz@dal.net +David Knepper dakal@dal.net +David Parton sedition@dal.net +Diane Bruce db@koruna.varner.com +Ian Westcott rakarra@dal.net +Jason Slagle raistlin@bahamut.net +Karthik Arumugham karthik@karthik.com +Kevin Turner kevin@dal.net +Lucas Madar lucas@dal.net +Mark Salerno msofty@dal.net +Peter Wood doc_z@dal.net +Ryan Smith xpsycho@dal.net +Sven Nielsen dalvenjah@dal.net + +Thanks goes out to all those not listed here, your help is much +appreciated. + +Feel free to contact the Bahamut team with any bugs, bug fixes, and the +like at: coders@dal.net + +Also, there is a public mailing list for bahamut: dalnet-src@dal.net. +This list would be the place to send suggestions and comments regarding +Bahamut. + +And, last but not least, the Bahamut website is at http://bahamut.dal.net. + +Thanks for the Support, +The Bahamut Coding Team diff --git a/doc/CHANGES_1.4 b/doc/CHANGES_1.4 new file mode 100644 index 0000000..8923288 --- /dev/null +++ b/doc/CHANGES_1.4 @@ -0,0 +1,266 @@ +Changes for 1.4.36 +- Fix bug that caused bans to be expired ~1 million times on startup +- Remove opers from fdlists that are set -o via SVSMODE +- Only show IPs of unknowns or clients to opers in /trace +- Use OpenSSL instead of GMP for encryption (much cleaner! :) +- Remove non-SSJOIN support +- Allow for a server to detect it is out of synch, and request a + channel resynch from an upstream hub +- Fix remote /stats k/K/a bug (it works now :) +- Optimize some sendto() things that are used a lot +- Add usermode +I (server hiding) + - Fix /whois, /admin, /who, etc to not allow a user to discover which + server a +I user is on +- Don't let *MY* opers /kill U: lined things (but pass on kills destined for them already) +- Chatops don't require you to be +gb (now, just +b) +- Various typos fixed +- No longer complain if a user is already on a +i channel, and they /join it +- Use hash tables for very common res functions, which were taking up + as much as 80% of CPU time in a pooled server +- add a command, /userip, for opers. Works just like /userhost. +- Allow /who +c @#channel +#channel @+#channel for more refined /who listings +- Add a /who flag for opers, +/-t, clients who have been on for more/less than seconds +- Don't let opers get stuck in weird anti-flooding bugs (oper recvq lock bug) +- When an oper deopers, they are returned to the appropriate client class +- Allow opers to /who +l for local clients (class = Y: class) +- Send optimizations for high-volume server connections +- Remove fdlists for lists of clients and instead use linked lists for things: + - recvq clients, instead of searching through *all* clients + - listing clients, ditto +- Remove certain things which actually caused poor server operation: + - HTM - relax sending out when we have high incoming traffic. + This actually causes a nasty bursty cycle. + - busy clients + This was taking up a great deal of CPU time to save CPU time. Hmm. +- Rewrite the entire base socket engine; now supports kqueue on freebsd. + - Poll() and select() use persistant states, so these should be twice as fast as well. + - Stop remapping fds. What's the point? +- /stats w reports fd map (don't use this on a large server! :) +- /stats z is more informative +- Hide the source servers of numerics (mask them with me.name) +- Hide /kill sources in quit messages (still in +s, though) and in messages + sent to killed client +- Hide split sources in quit messages +- Add a LINKSCONTROL command which allows a services-controlled /links list +- Better server traffic accounting in /stats ? (uses a moving average instead of a plain average) +- Fix a bug in which connecting servers will always remove a key if the channel exists (argh!) +- Correctly propogate cmode +O +- Show more squelched info in /whois to opers +- Be smarter about broken FD_SETSIZE implementations +- Crash if we try to free something twice in the block allocator, produces a useful coredump + instead of confused opers and an unrelated crash hours later. +- ability to lock /lusers output via services for a dynamic amount of time +- Fix 'ghost channels' where I create a channel but none of the users in it exist to me +- Allow /who +i ip/cidr and /who +I (show IPs only) for opers +- SAJOIN, like SAMODE for joining channels. Joins through all modes, sends a globop. +- Local servers notify the channel of an invite, not the server the invitee is on +- Remove the drone module, replace it with a powerful and generic module system that + has event-based hooks. +- Streamline some privmsg stuff, fix a few bugs. +- Fix a bug in which an IP ban on 1.2.3.4* wouldn't work. +- Dehybridize some things. +- SVSMODE +T, which sets a "client type" that can be seen in a /who +T +- Don't allow ',' in channel keys +- Fix umode +r/-r notification to clients +- Pretty print some things in /stats ? +- Remove support for non-NOQUIT servers +- Modes sent from servers come from the local server now +- Complain about /who +, where isn't valid, instead of sending the entire client list +- Move SQLINES and SGLINES into another hash-based structure for fast lookups +- Add SVSHOLD, which adds a local temp qline for a nick for N seconds, intended to replace + enforcers in services. +- Make HTM work on outgoing traffic (the part of HTM that limits sending lots of expensive + things like /list) +- Don't complain about servers relinking that look 'juped' + (don't complain if the server that already exists is U: lined, unless I actually have a + .conf U: line for it!) +- Compile with GCC3! +- Nicer umode separation, ie what used to come in as *** Notice -- comes in as: + +d : *** Debug -- + +y : *** Spy -- + +c : *** Client -- +- Channel join throttling (cmode +j, but disabled for user changes by default to be compatible with + pre-1.4.36), defaults to 8 network non-split joins in 4 seconds before saying channel is full. +- Fix the DEBUGMODE pattern string exploit + +Changes for 1.4.35 +- Source address support on /connect problem fixed +- Squelching added, umode +x or +X (+X is silent squelch), this + prevents the user from doing certain online tasks such as privmsg. + Meant to be set by a U: lined server or client using SVSMODE. +- Complete rewrite of the kline/akill/zline system. (s)zlines no longer + exist. K: lines set on IP addresses without username portions (or *) + are treated as Z: lines used to be. CIDR banning is now supported + in all K: line/akill bans (ie, 204.127.54.112/28). +- +F usermode bypasses ircd's recvq throttling for opers +- Improved handling under high load situations +- Ban munching bug introduced in 1.4.34 is fixed +- /rehash GC now works +- lots of sendto_ops_lev changed to sendto_realops_lev for speed +- Fix a bug where we'd try to target limit messages by a server and + write to locations of memory that weren't ours :) +- Fix O: flags that just didn't work as advertised +- Moved rejection notices to umode +j (re_j_ection) +- Moved KILL messages from U: lined clients to umode +K (oper only) +- Support for a loadable drone module, compile with --enable-dronemodule, + ircd tries to load drone.so from DPATH on startup or on /rehash drones, + read src/drone.c to view the interface +- /stats t shows more information +- Various code cleanup and readability fixes +- Users and opers will now recieve a different output to '/who ?'. +- When 'HELP_FORWARD_HS' is defined, non-opers /quote help requests + will be forwarded to HelpServ. + +Changes for 1.4.34 +- Don't use FD_SETSIZE at all if USE_POLL is defined +- Fixed a server negotiation bug that could break apart the network + when autoconnects and user connects were done at the same instant +- Fix a bug where PART messages were not sent to 'userB' when 'userA's + QUIT message was squelched on more than 1 channel +- Fixed split riding ability left over from hybrid (where a channel + with a newer TS could 'take over' if it had ops and the older TS channel + did not) +- Fixed 'topic riding' ability that allowed topics from newer TS'd channels + to propogate. +- Fixed channel ban desync on netjoin +- all channel modes are now sent with a TS +- Target limiting anti-spam measure installed +- Reject acebot-style drones by default +- Minor fixes to prevent annoying auth error messages +- Minor configuration/installation fixes + +-- WARNING -- +1.4.34 may cause desynch in net joins if used on a network with newer servers! +This is because the algorithm for determining which channel modes to keep +when servers rejoin has changed. You should upgrade your entire network +to 1.4.34. +-- WARNING -- + +Changes for 1.4.33 +- Only ops can invite on channels +- Various desync-causing memory-corrupting bugs fixed +- Fixed a problem with perm klines where they werent removing the user +- Moved to zlib 1.1.4, as 1.1.3 was vulnerable (but not directly in ircd) +- Fixed minor SVSKILL wrong direction issue. +- Fixed a wierd desync issue with sqlined channels +- Fixed /stats l's sendM statistic - it wasnt working properly with crypt + +Changes for 1.4.32 +- Throttling modified to be more friendly and punish repeat offenders +- Major bug causing memory corruption (coredumps as well as + duplicate or missing messages) fixed +- Lag on signon fixed (where a user connects, but the server chooses + to ignore the user until something is sent to them) +- Fixed a netsplit detection bug when a leaf server splits from its hub + (for no_chanops_when_split) +- Fix for .conf based K: lines (that just didn't work) + +Changes for 1.4.31 +- Connection Throttling Patch from Chip Norkus + +Changes for 1.4.30 +- Updated 'make profile'; now on glibc2 systems, you can kill -USR1 the + process and get a current profile dump, and restart profiling +- Kline/akill/zline matching has been revamped, which should help greatly with + lag under heavy user loads with many klines/akills/zlines +- Deny sending .zip files and . files (with a null extension) to prevent + the spreading of exploits + +Changes for 1.4.29 +- Umode +R to not allow msgs from non registered nicks +- chanmode +R extended to deny msgs for -r clients in channel +- +c/+R extended to squelch quit messages with color/from non reg'd nicks +- wrapped HTM detection code in #ifndef HUB +- Added channel qline reason display +- Removed LITTLE_I_LINES as with services they are dumb +- Massive code reformatting +- Moved some oper notices around to reduce unnecessary traffic +- klines match IP field too now, for NICKIP akills. +- Changed default mask to @DALnet so it's known it's a fake address + +- This is the last 1.4 release planned. For real this time. + +Changes for 1.4.28 +- Minor bug fixes + +Changes for 1.4.27 +- Fixed key bug +- Fixed showstopper remoteclientsonlygetpiecesofaClient bug + +Changes for 1.4.25 +- Hide Nick Collisions (Revealing services location) +- Make 005 show more info +- Add who +i to search by IP +- Hide stats L for non opers +- Add NICKIP CAPAB for services to get nicks +- Channel QLINES from Ryan +- Removed * from valid key char + +Changes for 1.4.23 +- Some error message changes/fixes +- Fixed a cloaking bug +- Added support to source from a different local IP address when /connecting + out to another server; useful for servers which don't want to use the main + IP in the M: line as the server<->server IP + - To use: Add : to the end of a C: line + - E.g.: C:192.168.0.1:pass:server.dal.net:7325:10:192.168.10.200 +- Block DCCs of .htm/.html files due to script viruses being spread in this + way +- Prompt for max channels per user and oper pw encryption in the config + script +- Example.conf brought up to date +- Display proper error messages when you can't join a channel +- Fixed the +a (away) who flag; its behavior was reversed from what it should + have been + +Changes for 1.4.22 +- Fixed a bug where a server with a bad name trying to connect or trying + to be used in /links could crash Bahamut + +Changes for 1.4.21 +- rate-squelch zipinbuf complain messages +- turn off yet more DNS debug messages (forward<>reverse query error) +- oper hostmasking no longer pollutes IPHASH (ouch) +- configure script reworked to search better for libgmp.a +- configure script bugs fixed + +Changes for 1.4.20 +- /whois works correctly for hostmasked opers. growl. +- configure gives more information about gmp errors. + +Changes for 1.4.19 (released, but not an advised upgrade) +- Fixed a crashing bug with /whois +- Fixed a crashing bug with /oper (I need to remember how to handle nulls correctly :) +- Imported res fixes from bahamut-stable +- made configure work for solaris to find gmp + +Changes for 1.4.18 (never officially released) +- Changed level of some debug messages to not go to all opers + +Changes for 1.4.17 (never officially released) +- Oper hostmasking: + Your I: line password is oper<.password> where password is optional. + You then /server opernick:operpass + Anyone +A can see your real username, host, and IP. + +Changes for 1.4.16 +- deal with long-time buffer overflow when more than MAXADDR + A DNS answers are received. + +Changes for 1.4.15 (never officially released) +- Crash in res.c fixed (due to wrong question received under heavy load) +- name resolution prevents ircd dns cache pollution + +Changes for 1.4.14 (previous release was 1.4.12) +- RC4 streaming encryption added, diffie hellman key exchange + - Requires GMP library + - Vulnerable to man-in-the-middle attacks + - Requires 'E' flag in the N: line on both servers. +- zlib-compressed links added + - Requires 'Z' flag in the N: line of a server + that wishes to zip outgoing links to that link. + +Changes for 1.4.12 (previous release was 1.4.8): +- /stats ?, v fixed to hide u-lined servers +- /lusers fixed to hide u-lined servers +- name resolution is more strict diff --git a/doc/CODING_STANDARD b/doc/CODING_STANDARD new file mode 100644 index 0000000..91453bd --- /dev/null +++ b/doc/CODING_STANDARD @@ -0,0 +1,10 @@ +The following are the Coding Standards for Bahamut. + +1) No C++ style comments are allowed in the code tree. +2) All indentations shall be 4 characters long - no tab characters '\t' +3) All variable names shall begin with a lowercase letter. +4) All variables defined as macros shall be in all Upper Case +5) All preprocessor directive shall be at char posistion 0 with no + spaces after the #. +6) all conditional/loop statements shall have the brace on a line + by themselves diff --git a/doc/Makefile.in b/doc/Makefile.in new file mode 100644 index 0000000..6dfd794 --- /dev/null +++ b/doc/Makefile.in @@ -0,0 +1,52 @@ +#************************************************************************ +#* IRC - Internet Relay Chat, Makefile +#* Copyright (C) 1990, Jarkko Oikarinen +#* +#* This program is free software; you can redistribute it and/or modify +#* it under the terms of the GNU General Public License as published by +#* the Free Software Foundation; either version 1, or (at your option) +#* any later version. +#* +#* This program is distributed in the hope that it will be useful, +#* but WITHOUT ANY WARRANTY; without even the implied warranty of +#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#* GNU General Public License for more details. +#* +#* You should have received a copy of the GNU General Public License +#* along with this program; if not, write to the Free Software +#* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +#*/ + +RM=@RM@ +MV=@MV@ + +INSTALL=@INSTALL@ +INSTALL_DATA=@INSTALL_DATA@ +INSTALL_DIR=@INSTALL_DIR@ + +FILES=opers.txt reference.conf template.conf + +all: + +build: + +clean: + +install: all + @for i in $(FILES); do \ + if test -f $(INSTALL_DIR)/$$i; then \ + echo $(MV) $(INSTALL_DIR)/$$i $(INSTALL_DIR)/$$i.old; \ + $(MV) $(INSTALL_DIR)/$$i $(INSTALL_DIR)/$$i.old; \ + fi; \ + echo $(INSTALL_DATA) $$i $(INSTALL_DIR); \ + $(INSTALL_DATA) $$i $(INSTALL_DIR); \ + done + + -@if [ ! -f $(INSTALL_DIR)/ircd.motd ] ; then \ + echo "ircd.motd does not exist, creating..."; \ + touch $(INSTALL_DIR)/ircd.motd; \ + echo "This is the default Bahamut MOTD" >> $(INSTALL_DIR)/ircd.motd; \ + fi + +distclean: clean + $(RM) -f Makefile diff --git a/doc/clones.txt b/doc/clones.txt new file mode 100644 index 0000000..e37be94 --- /dev/null +++ b/doc/clones.txt @@ -0,0 +1,180 @@ +$Id: clones.txt,v 1.1 2005/01/12 07:44:56 mmondor Exp $ +Originally written by Trevor Talbot (Quension) in October 2004. + + +Clone Limiting +============== +Bahamut supports limiting the number of connections from a single place, +and this file describes the configuration for that feature. There are two +kinds of places: a "host" is a single IP (10.0.0.1); a "site" is a single +/24 block of IPs (10.0.0.*). Clones are the number of connections from a +given place. + +Two types of clone limits are supported: local clones are the number of +connections from a place on this server only; global clones refer to +connections on the entire network. When a clone limit is reached, the +server denies further connections from that place. + + +Local clone limiting +-------------------- +The default local clone limits are set using the local_clones token in the +Options block in ircd.conf; see doc/reference.conf for details. In the +absence of more specific limits, the defaults will regulate all connections +to the server. + +Local limits set using the maxclones token in a Class block override the +defaults; this is typically used with Allow blocks to provide exemptions +for specific hosts. When a Class block defines a host limit, clients in +that class are implicitly exempt from the default site limit. + +Example: + + options { local_clones 1:10; }; + class { name special; maxclones 5; }; + allow { host *@10.0.0.1; class special; }; + + Suppose there is one client each connected from 10.0.0.2 - 9 (8 clients + from 10.0.0.*). If another client from 10.0.0.2 tries to connect, it + will be rejected because the default limit of 1 connection per host was + reached. Five more clients from 10.0.0.1 will be allowed to connect, + because the "special" class allows up to 5 connections from a single + host. + + Note that because the class did not provide a site limit, five clients + from 10.0.0.1 will always be allowed to connect, despite the default + limit of 10 per site. To maintain a site limit for these clients, + specify one in the class maxclones statement: + + class { name special; maxclones 5:10; }; + +The default limits can be changed online using the SET DEFLCLONES command. +Note that this setting is not saved and will be lost when the server is +restarted; it is useful for testing or setting temporary limits. + + SET DEFLCLONES - to display both limits + SET DEFLCLONES - to set the host limit + SET DEFLCLONES : - to set both limits + + Supplying a limit of 0 will revert to the internal default. + +Specific local limits can be set online using the SET LCLONES command; +these are called "soft" limits and override all other local limits. +A soft host limit also provides an implicit exemption from class and +default site limits. Like DEFLCLONES, these are temporary. + + SET LCLONES - to display the limit + SET LCLONES - to set the limit + + Use a specific host or site mask, e.g. "10.0.0.1". Supplying a limit + of 0 will remove the soft limit; class and default limits will be used + instead. + +Note that it is possible to create some interesting configurations using +the class setting. For example, this would effectively allow 5 clones from +a specific ident@host, since only clients matching the allow block would get +the increased per-host limit: + + options { local_clones 1; }; + class { name special; maxclones 5; }; + allow { host ident@host; class special; }; + + +Global clone limiting +--------------------- +This works in basically the same way as local clone limiting, except that +it considers connections on the entire network, and is intended to be +managed by network services. + +The default global clone limits are set using the global_clones token in +the Options block in ircd.conf; see doc/reference.conf for details. In the +absence of more specific limits, the defaults will regulate all connections +to the server. Note that to be effective, all servers must share the same +global limits. A server can only reject new connections to itself; it +cannot tell other servers to do so. + +Example: + + options { global_clones 2:6; }; + + If there are six clients on other servers on the network, from various + addresses in the 10.0.0.* block, this server will not allow another + connection from 10.0.0.1, because the global site limit has already + been reached. However, if the remote servers have a higher default, + they will still allow more clients to connect. + +Network services can set specific limits using the SVSCLONE command; these +are referred to as "hard" global clone limits. A hard host limit provides +an implicit exemption from the default site limit. The command syntax is +provided here for services authors to reference; it is not accessible to +clients. + + SVSCLONE - to set the limit + + Use a specific host or site mask, e.g. "10.0.0.*". Supplying a limit + of 0 will remove the hard limit. This setting is stored by all servers + and propagated on netburst, in a manner similar to SQLINES. + +The default limits can be changed online using the SET DEFGCLONES command. +Note that this setting is not saved and will be lost when the server is +restarted; it is useful for testing or setting temporary limits. + + SET DEFGCLONES - to display both limits + SET DEFGCLONES - to set the host limit + SET DEFGCLONES : - to set both limits + + Supplying a limit of 0 will revert to the internal default. + +Specific global limits can be set online using the SET GCLONES command; +these are called "soft" global clone limits and override the defaults. +A lower soft limit will also override a service-set hard limit, but it is +not possible to set a soft limit higher than a hard one. Like DEFGCLONES, +these are temporary. + + SET GCLONES - to display the limits + SET GCLONES - to set the soft limit + + Use a specific host or site mask, e.g. "10.0.0.1". Supplying a limit + of 0 will remove the soft limit; hard and default limits will be used + instead. + + +Monitoring +---------- +Rejection notices for clone connections are sent to usermode +j, in the +following format: + + clone ( / ) + + is the rejected client + is the host or site mask, e.g. "10.0.0.*" + is the number of clients currently online from that place + is the limit for that place + is "local" or "global" + is where the limit was set: + "default", "soft", "hard", "class " + +General statistics about the clones system are available on STATS d. + +A list of specific limits is available on STATS D, returned on numeric 225: + + D + + +Notes +----- +When local and global limits differ, the lowest limit applies. This means +you should carefully choose the defaults and how you want to manage the +specific limits, as working with both types of limits at once can be +difficult. + +When a client is rejected, its exit reason is one of: + + Too many connections from your host + Too many connections from your site + +It is not told which specific limit was reached. + +Very little host/site mask validation is done for the online commands; it +is possible to query and set limits for completely bogus masks. Such +limits will be retained but never used. diff --git a/doc/modules.txt b/doc/modules.txt new file mode 100644 index 0000000..8603b98 --- /dev/null +++ b/doc/modules.txt @@ -0,0 +1,44 @@ +Bahamut Hook Module System [2003-10-13] + +First released in Bahamut 1.4.36, the hook module system permits outside modules +to be 'hooked' into bahamut without having to modify the core source tree. +This is to allow other groups to write code to benefit IRCD that serve +specific functions. As an example, some groups write modules to block +common trojan / drone patterns. + +Once a module has been built, hooking it into the system is fairly simple. +The components that are used, are: + +1. A modules/ directory where the shared modules themselves are stored + +To enable the hook module system, you must issue --enable-hook-modules +at configuration time. Example: + +./configure --enable-hook-modules + +(As of bahamut 1.8, this is implicitely assumed.) + +--- + +1. modules/ directory + +This directory stores the shared modules that you wish to hook into bahamut. +The modules/ directory is found in the same directory as your server +configuration files (eg: bahamut-release/modules) + +--- + +USER COMMANDS TO CONTROL MODULES + +There are a few new commands to control modules. They are all accessed +by using /quote module . + + /quote module LIST List all modules loaded in memory + /quote module HOOKS List where modules are hooked into ircd + /quote module LOAD Load a module into memory + /quote module UNLOAD Unload a module from memory + +To use the above commands, you must be an IRC Operator at the time +of issuing the command (umode +o). To issue LOAD/UNLOAD commands, you must be +a Server Adminstrator (umode +A) + diff --git a/doc/old/Authors b/doc/old/Authors new file mode 100644 index 0000000..0051d0b --- /dev/null +++ b/doc/old/Authors @@ -0,0 +1,137 @@ +/************************************************************************ + * IRC - Internet Relay Chat, doc/AUTHORS + * Copyright (C) 1990 + * + * AUTHORS FILE: + * This file attempts to remember all contributors to the IRC + * developement. Names can be only added this file, no name + * should never be removed. This file must be included into all + * distributions of IRC and derived works. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 1, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +IRC was conceived of and written by Jarkko Oikarinen . +IRC was originally written in University of Oulu, Computing Center. +Jan 1991 - IRC 2.6 jto@tolsun.oulu.fi + - Multiple Channels and protocol changes + +Contributions were made by a cast of dozens, including the following: + +Markku Jarvinen : Emacs-like editing facility for the client + +Kimmo Suominen : HP-UX port + +Jeff Trim : enhancements and advice + +Vijay Subramaniam : advice and ruthless publicity + +Karl Kleinpaste : user's manual + +Greg Lindahl : AUTOMATON code, the Wumpus GM automaton, +myriad bug fixes + +Bill Wisner : numerous bug fixes and code +enhancements + +Tom Davis and Tim Russell : +VMS modifications + +Markku Savela : advice, support, and being the +incentive to do some of our *own* coding. :) + +Tom Hopkins : bug fixes, quarantine lines, +consolidation of various patches. + +Christopher Davis : EFnet/Anet gateway coding, +many automata ;), documentation fixing. + +Helen Rose : documentation updating, and fixing. + +Tom Hinds : emacs client updating. + +Tim Miller : various server and client-breaking +features. + +Darren Reed : various bug fixes and enhancements. +Introduced nickname and channelname hash tables into the server. + +The version 2.2 release was coordinated by Mike Bolotski +. + +The version 2.4 release was coordinated by Markku Savela and +Chelsea Ashley Dyerman + +The version 2.5.2 release was coordinated by Christopher Davis, Helen Rose, +and Tom Hopkins. + +The versions 2.6.2, 2.7 and 2.8 releases were coordinated by Darren Reed. + +Contributions for the 2.8 release from the following people: +Matthew Green +Chuck Kane +Matt Lyle +Vesa Ruokonen + +Markku Savela / April 1990 +Fixed various bugs in 2.2PL1 release server (2.2msa.4) and changed +sockets to use non-blocking mode (2.2msa.9). [I have absolutely +nothing to do with clients :-] + +Chelsea Ashley Dyerman / April 1990 +Rewrote the Makefiles, restructuring of source tree. Added libIrcd.a to +the Makefile macros, numerous reformatting of server text messages, and +added mkversion.sh to keep track of compilation statistics. Numerous +bug fixes and enhancements, and co-coordinator of the 2.4 release. + +jarlek@ifi.uio.no added mail functions to irc. + +Armin Gruner / May, June 1990: +* Patched KILL-line feature for ircd.conf, works now. + Enhancement: Time intervals can be specified in passwd-field. + Result: KILL-Line is only active during these intervals +* Patched PRIVMSG handling, now OPER can specify masks for sending + private messages, advantage: msg to all at a specified server or host. +* Little tests on irc 2.5 alpha, fixed some little typos in client code. + Change: common/debug.c has been moved to ircd/s_debug.c, and a + irc/c_debug.c has been created, for the benefit that wrong server msg + are displayed if client does not recognize them. (strange, if a server + sends an 'unknown command', isn't it?) + +Tom Hopkins / September, October 1990: +* Patched msa's K lines for servers (Q lines). +* Consolidated several patches, including Stealth's logging patch. +* Fixed several minor bugs. +* Has done lots of other stuff that I can't seem to remember, but he + always works on code, so he has to have done alot more than three + lines worth. :) + +Thanks go to those persons not mentioned here who have added their advice, +opinions, and code to IRC. + +Various modifications, bugreports, cleanups and testing by: + +Hugo Calendar +Bo Adler +Michael Sandrof +Jon Solomon +Jan Peterson +Nathan Glasser +Helen Rose +Mike Pelletier +Basalat Ali Raja +Eric P. Scott +Dan Goodwin +Noah Friedman diff --git a/doc/old/FAQ b/doc/old/FAQ new file mode 100644 index 0000000..b997afc --- /dev/null +++ b/doc/old/FAQ @@ -0,0 +1,17 @@ +These are the two most frequently asked questions about IRC server +compliation: + +* I compile and everything seems fine during the compiling, but when it +comes time for the program to link, I get errors complaining about dns and +res things. What causes this? + +You need to make sure IRCDLIBS in the toplevel Makefile includes -lresolv + + +* I start the ircd program and I get an error about chdir, no such file or +directory. What causes this? + +Make sure IRCDDIR in the toplevel Makefile is set to the same as DPATH in +include/config.h + +(send suggestions to this FAQ to hrose@cs.bu.edu) diff --git a/doc/old/Hybrid-team b/doc/old/Hybrid-team new file mode 100644 index 0000000..7475496 --- /dev/null +++ b/doc/old/Hybrid-team @@ -0,0 +1,35 @@ + +The hybrid team is a group of ircd coders who were frustrated +with the instability and all-out "dirtiness" of the efnet ircd's +available. "hybrid" is the name for the collective efforts of a group +of people, all of us. + +Anyone is welcome to contribute to this effort.. + +We have run the code through "purify", a commercial program designed +to find memory leaks. The code has been mostly prototyped. Profiling has also +been done to catch slow portions of the code. Portions of "crufty" code have +been re-written. We have also looked at making the code as easy to setup +up and run as possible using configure, checking header files etc. +Finally speed enhancements and other enhancements have been made to this ircd. + +That is not to say that there are still not bugs, There are always bugs. +But we have reviewed each others work on this project, and are open +to bug reports. + +The following people have contributed blood, sweat, and/or code to +this release of hybrid, in nick alphabetical order. + +cbongo, Chris A. Bongaarts (cab@tc.umn.edu) +comstud, Chris Behrens (cbehrens@concentric.net) +Dianora, Diane Bruce (db@db.net) +johan, Johannes Erdfelt (jerdfelt@eng.mindspring.net) +orabidoo, Roger Espel LLima (espel@unix.bigots.org) +Rodder, Jon Lusky (lusky@vol.com) +Shadowfax, Michael Pearce (mpearce@varner.com) +ThemBones, Brian Kraemer (kraemer@u.washington.edu) +Wohali, Joan Touzet (joant@cadence.com) + +Others are welcome. + +email bug fixes/complaints/rotten tomatoes to ircd-hybrid@vol.com diff --git a/doc/old/Operators b/doc/old/Operators new file mode 100644 index 0000000..c950d7b --- /dev/null +++ b/doc/old/Operators @@ -0,0 +1,242 @@ +Internet Relay Chat Operator Etiquette Guide + +May, 1992 + +Welcome! You've either been selected to be an IRC Operator or you have set +up your server and thus have taken on the dual task of IRC Server +Administrator and IRC Operator. Your future days will be filled with hours +of fun chatting on IRC, and then wondering why everyone you talked to went +away, because the links had apparently broken. + +Linking: +======== + +You will be assigned links from the IRC Routing Coordinators. Please +use these links and these links ONLY. The links have been designed to +maximize efficiency and make delays in chatting minimal. You will +usually be given two links, one to each regional backbone site. +Connect to the primary site first and then to the secondary site. You +should not need to connect to any other sites. You will be informed if +this policy changes. + +Kills +===== + +/kill is a special operator command. You should use it with +care, and only if absolutely needed. The format is as follows: +/kill NICKNAME comment. Comment can be a phrase of almost any length +(within reason) and should be used for specifying the reason of the kill. +Example: /kill Trillian She's a Ghost +IRC Ghosts are created after a net split has occured and the net has yet to +relink. + +/wallops PHRASE This is used to talk to those users who have their +user mode set to +w. /wallops used to be a way for operators to talk +about important matters in linking etc., but it has little use +nowadays. + +/TRACE command /TRACE is useful to know what servers are connected to +what. Sometimes /trace can be confusing, especially if you are using +it for the first time. Here is an example of a trace from +stekt1.oulu.fi to cdc835.cdc.polimi.it. + +/TRACE cdc835.cdc.polimi.it + +*** Link stekt1.oulu.fi<2.7.2> ==> cdc835.cdc.polimi.it +*** Link rieska.oulu.fi<2.7.1>e ==> cdc835.cdc.polimi.it +*** Link nic.funet.fi<2.7.1>e ==> cdc835.cdc.polimi.it +*** Link ircserver.et.tudelft.nl<2.7.1>e ==> cdc835.cdc.polimi.it +*** Link vesuv.unisg.ch<2.7.1>e ==> cdc835.cdc.polimi.it +*** Link apollo.di.unipi.it<2.7.1>e ==> cdc835.cdc.polimi.it +*** Oper Class[10] ==> Allanon[cdc835.cdc.polimi.it] +*** User Class[11] ==> Lupandy[plus2.usr.dsi.unimi.it] +*** Serv Class[3] ==> apollo.di.unipi.it[131.114.4.36] 132S 445C +*** User Class[11] ==> Punk[pluto.sm.dsi.unimi.it] +*** User Class[11] ==> TheEdge[pluto.sm.dsi.unimi.it] +*** User Class[10] ==> Mork[cdc835.cdc.polimi.it] +*** User Class[11] ==> Lollo[c700-2.sm.dsi.unimi.it] +*** User Class[11] ==> Attila[hp2.sm.dsi.unimi.it] +*** Class 0 Entries linked 1 +*** Class 11 Entries linked 5 +*** Class 10 Entries linked 2 +*** Class 3 Entries linked 1 + +From this output you can see that the route goes first to +rieska.oulu.fi (running version 2.7.1e), then nic.funet.fi, +ircserver.et.tudelft.nl, vesuv.unisg.ch, and apollo.di.unipi.it, after +which cdc835 is the next server. Then we see the connections on +cdc835: One operator (Allanon) and 6 users are on line. The class of +each connection is given. There is only one server connected to cdc835 +at the moment, and that server is apollo.di.unipi.it (cdc835 is said +to be a "leaf" server at the moment). The numbers 132S 445C in the end +of line tell us, that there are 132 servers and 445 clients connected +to the servers from apollo onwards. Finally we see a grand total of +connections in each connection class. + + +/SQUIT server {comment} + /squit isolates a specified server from the next closest server, when +you look at it along the trace path starting from your server. +This is usually used in conjunction with CONNECT (explained later) to +reroute traffic. This will be described in detail in the section +"routing", preceding CONNECT. + + Usage (and examples): + + /squit E + + If the network looks like this initially (and you are on server A) + + + A <---> B <---> C <---> D + ^ + | + v + G <---> E <---> F <---> ... (rest of the net) + + + Then after issuing the previous /squit the network would look like this: + + A <---> B <---> C <---> D + + + G <---> E <---> F <---> ... + + + /squit E {comment} + + It usually helps to give a reason why you are sending a + SQUIT for a server. This can be accomplished by sending + the command "/squit server This link is making the US route + through Finland". The SQUIT will then be sent out, and the + server sending the squit will WALLOP sending the comment + so all operators can see it. + +/CONNECT server {portnum server2} + /connect is used to establish a link between two servers. These +connections must be authorized by each server's ircd.conf file, but +any operator can issue a CONNECT between authorized servers. This +command is most often used in conjunction with SQUIT to reroute +traffic. + If only one argument is given, this command causes the server you +are on to attempt to connect to the server specified. For example, +"/connect B" (in the previous example) would cause your server (A) to +connect to B. + Suppose you wanted to reconnect server F to server E? You cannot +contact server F since it is no longer part of your network. However, +you can tell server E to connect to it. A remote CONNECT can be issued +to server E. + + Examples (assume you are on server A): + + /connect B + + If the network initially looks like this: + + A B <---> ... (rest of network) + + Then afterwards (if the connection succeeds) the network will look + like this: + + A <---> B <---> ... + + + In the example where you wanted to reconnect server E to F, the + following syntax would be appropriate (note: we are assuming that + F's irc socket port is 6667, which is the default) + + /connect F 6667 E + + If the network initially looks like this: + + A <---> B <---> C <---> D + ^ + | + v + G <---> E F <---> ... + + Then after your CONNECT request the network topology will look like this: + + A <---> B <---> C <---> D + ^ + | + v + G <---> E <---> F <---> ... + + Be careful when connecting servers that you know which command to + use! If you simply issued "/connect F" from your server, the + network would look like this: + + + ... <---> F <---> A <---> B <---> C <---> D + ^ + | + v + G <---> E + + which for various reasons (discussed below) might be very + undesirable. + +Routing +======= + + When and how should you do rerouting? This depends on where your +server is topologically located and whether you route traffic. If you +are a leaf node (i.e. only connect to one server at a time) then +chances are you won't need to do any routing at all. Your ircd.conf +file should be written to connect to the best possible servers first +before trying alternates. At the most, you may decide to squit an +alternate server and connect to your primary if/when it goes back up. +This only involves local squits, however. + + If you are operating a backbone site, you may find yourself +rerouting things quite often. If the servers badger.ugcs.caltech.edu +(Pasadena, CA), irc.mit.edu (Boston, MA), minnie.cc.utexas.edu +(Austin, TX) and ucsu.colorado.edu (Boulder, CO) were routing traffic +in the following way: + + ... <---> minnie <---> badger <---> bucsd <---> ucsu <---> ... + +It would make sense to either squit ucsu and reconnect it to minnie, +or disconnect minnie from badger and connect to ucsu, because +topologically (and geographically) ucsu and minnie are rather close. +There are occasions when US traffic for some reasons winds up being +routed through Australia. This is another case where traffic should +definitely be rerouted. However, there are sometimes occasions when +routing is going through "backdoor" methods. If you see something +totally outrageous (like the east coast and the west coast being +connected by eff.org) please ask for example on channel #twilight_zone +before you send any squits, because chances are, it's like that for a +reason. + + Of course, any operator can remotely squit or connect servers, so +if you see a problem and you're sure you know how to fix it, it's a +good idea to do so. If the operator of a server which is is being +routed poorly is online, it's probably best to contact him/her first, +though. + + Chances are that hub operators will be more familiar with the +general topology of the network and which servers connect to which +(which is why most of the manual routing is left to them), so if you +have any problems, talk to the other operators on operator channels +(#twilight_zone, #eu-opers etc.) That's what they are there for! + Also, be aware that servers will notify all the operators online of +remote SQUITs and CONNECTs via WALLOPS. + +Please let us know if there should be any additions to this guide. Again, +this is not MANDATORY, this is just a GUIDE. Please conduct yourself as +an IRC Operator would...you are looked upon for assistance, both emotional +and mental. + +Helen Rose Christopher Davis Noah Friedman + + +January, 1991 + + +Updated by + +Mauri Haikola + + +May, 1992 diff --git a/doc/old/README b/doc/old/README new file mode 100644 index 0000000..744f661 --- /dev/null +++ b/doc/old/README @@ -0,0 +1,8 @@ +This stuff is so ancient it's not even funny anymore. Take it with +a grain of salt when you read it. --JRL + +The Bill Wisner example.conf has been updated, I have also included +Helen Roses example.conf as example.conf.trillian (taken from +the CSR tree ) as it is superiour in some respects to Bill's version. +Updated as well to reflect hybrid . --Dianora + diff --git a/doc/old/README.hybrid b/doc/old/README.hybrid new file mode 100644 index 0000000..a278092 --- /dev/null +++ b/doc/old/README.hybrid @@ -0,0 +1,201 @@ ++hybrid-5.2p1 (5/12/98) +removed uneeded variable in aClient (Dianora) +added missing #ifdef's for USE_SYSLOG (Dianora) +reverted to old check_pings() to fix high cpu usage (Rodder) +fixed DEBUGMODE (Dianora) + ++hybrid-5.2 (4/21/98) - The inevitable bug fix release +-fixes +* changed many of the defaults in config.h +* removed ident_fdlist it was never used anyway (comstud) +* fixed quote kline for 10 character user names (Dianora) +* obscure bug with KICK message in a desync channel situation (Dianora) +* bug with max channel name fixed (comstud/Dianora) +* stop spam from links command i.e. beeps (Dianora) +* bug with default +i not showing MODE to user initially (Rodder) +* ANTI_IP_SPOOF moved to "broken" section of conf (Rodder) +* ident lookups now work properly for all interfaces of + multihomed (or "VIF"'d) machines, including Solaris 2.6 (Rodder) +* stats l/L no longer shows -i clients to non-opers (Rodder) +* exorcised evil timedelta variable +* Fixed oper wallops broadcasting instead of routing (Dianora) +* Covered up bogus "Got Ident" messages in read_authports() (Rodder) +* Fixed missing RPL_ENDOFTRACE for non-opered clients (Dianora) +* #undef IDLE_FROM_MSG fixed, ping/pong/ison do not reset idle time (Dianora) + +-feature adds +* bumped HTM code to not kick in until 40K/s by default +* stop people from laming up the kline conf file with # in comment (Dianora) +* added comstuds SEPARATE_QUOTE_KLINES_BY_DATE +* use block allocator in FLUD code (Shadowfax) +* added HTM quiet or HTM noisy option -- see NOISY_HTM in config.h + for initial setting (Dianora) +* added LOCOPS, each type of wallops/operwall/locops is now flagged (Dianora) +* added signon time to RPL_WHOISIDLE (Dianora) +* allow local opers to see kills requested by riss (Dianora) +* added ANTI_SPAMBOT code, read config.h (Dianora) +* added fixklines to tools dir, use it to check kline.conf for #'s inside + of K-line comments (Dianora) +* added OLD_Y_LIMIT in config.h.dist to go back to old Y/I line behaviour + (Dianora) +* M: line passwd field now used to specify address to bind to on + machines with multiple interfaces. (Rodder) +* P: line passwd field now used to specify address to bind to on + machines with multiple interfaces. (Rodder) +* added /quote set SPAMNUM SPAMTIME to control ANTI_SPAMBOT behaviour (Dianora) +* hybrid option flags removed from m_version and replaced + by (for opers) full listing of server defines in m_info (Rodder) +* poll() code mods ported from CSr30 (comstud) by cbongo +* m_whois() rewritten to use hash table when possible (Dianora) +* spambot sign on code added (ThemBones) +* i line (LITTLE_I_LINE) support, restricted i lines (Dianora) +* NO_CHANOPS_WHEN_SPLIT delays channel hacking until rejoin (Dianora) +* ANTI_SPAMBOT on sign on code (ThemBones) +* only allow 4 kicked nicks per kick (Dianora) +* sped up kline processing, redid check_pings in ircd.c (Dianora) +* Server now checks for sane TS when connecting to other server, + see TS_MAX_DELTA and TS_WARN_DELTA in config.h (Rodder) +* Server checks for backwards spinning clock and complains if + found (Rodder) +* Check for error when timeofday is set (Shadowfax) +* Announce TS changes after TS induced deops (Shadowfax) +* stop redistributing away information to other servers +* Prepared for TS4 mixed net by checking validity of channel mode changes + only at the local server (orabidoo) + ++hybrid-5 (9/26/97) +* LOTS AND LOTS OF CHANGES IN CONFIG.H +* reorganized source tree, eliminating common subdir +* reworked hash.c (Dianora) +* reworked parse.c, tree prefix command lookups (Dianora/orabidoo) +* all code is now function prototyped (Dianora) +* improved bad host/nick handling, i.e. dns spoofers (ThemBones) +* sped up send_umode_out in s_user.c (ThemBones) +* sped up whowas processing, removed away from whowas (Dianora) +* redid m_kline/cluster in s_serv.c (Dianora) +* redid dline/kline handling (Dianora/Rodder/ThemBones) +* removed lame #ifdefs in poll() (Dianora) +* always defined D_LINES/E_LINES/F_LINES (Dianora) +* TS_ONLY server now (Dianora) +* cleaned up s_auth.c (Dianora/ThemBones) +* changed BAN_INFO handling (Dianora) +* sanity testing in res.c (Dianora) +* added orabidoo's scache code (orabidoo/Dianora) +* added KLINE_WITH_REASON kline reason on klines/connects (Dianora) +* added NON_REDUNDANT_KLINE code (Dianora) +* added ANTI_IP_SPOOF code (Dianora) +* added temporary kline code (Dianora) +* added Jolo's block allocator into list.c (Jolo/Dianora) +* added ANTI_NICK_FLOOD code (Dianora) +* removed UNIXPORT code (Dianora) +* removed lame unused code in match.c (Jolo) +* corrected many type errors, ran through purify (Jolo) +* removed unused variables (Dianora) +* folded in Shadowfax's FLUD code (Shadowfax/Dianora) +* folded in Shadowfax's LOCKFILE code (Shadowfax/Dianora/Rodder/ThemBones) +* added optional GLINE code (Dianora) +* stats K now works for normal users (Dianora) +* quote UNKLINE code as a option added (Dianora/common) +* Reworked ACKPATCH, removed ONE kludge and use confeq field of Y instead, + used hash table of ip's (Dianora) +* removed UNIXPORT support (Dianora) +* added support for oper WALLOPS back in. Use /quote OPERWALL to send operwalls. +* reworked version.c.SH to track build number (Rodder) +* make clean removes more junk (Rodder) +* added check for adequate FD_SETSIZE +* created tools subdir (Rodder) +* added "Unauthorized connection" back in, under umode +c (Dianora/Rodder) +* modified autoconf for Solaris 2.6 (Rodder) +* modified LUSERS to ignore masks (Rodder) +* fixed mysterious exit() in fdlist.c from fd leak in s_auth.c (Dianorans) +* fixed overrun bugs in res.c (Dianora/Johan/Shadowfax) + +----------------------------------------------------------------------------- ++hybrid-4.3 (8/19/97) - more bug fixes +* typo that caused immediate crash on HPUX fixed +* IP/hostname mismatch code fixed, warns the user instead of opers +* typo fixed in missing klinefile error message + ++hybrid-4.2 (8/4/97) - minor bug fix, one new feature +* rcs version string was clobbering server version string +* Bans can now match by IP for hosts that resolv (db) + IP_BAN_ALL define added to config.h + ++hybrid-4 (7/28/97) +* LOTS OF NEW STUFF IN CONFIG.H, GO READ IT!! THE WHOLE THING!! + EVEN IF YOU ARE UPGRADING TO THIS FROM A HYBRID-4 BETA!! +* patch for yet another NICK bug +* patch for m_server() bug +* patch for TS3 bug +* switched to GNU autoconf (thanks ns!) +* WALLOPS now only go to real opers +* ircsprintf() mod to check for NULL args (db) +* fixed possible overflow res.c (db) +# seperate klines file - see config.h (db) +* quote_dline support - see config.h (db) +* fixed timezone snafu in date() +* added RFC1035_ANAL define reject _ and / in hostnames +* removed old DELAY_NICK define.. broken and unneeded +* modified s_err.c and created s_err.h. See CUSTOM_ERR in include/config.h +* m_server() now quietly ignores clients that try to use SERVER +* removed NOTE code, removed SUMMON code, gutted USERS +* added automatic timestamps to comments of quote KLINE and DLINE +* changed failure notice for clients bouncing off ACKPATCH + to "Only one connection at a time allowed from your hostname" +* cleanup to channel.c +* format() mod to check for NULL args (di) +* removed more useless crap (UPHOST, VMS, etc) from config.h +* #undef F_LINES fixed +* oper WALLOPS changed to OPERWALL (code taken from csr30) +* BSDI 3.0 FD_ALLOC support (db) +# changed output of STATS D +* Removed Q: line support +* cleaned up find_conf_ip (db) +* fixed crypt() usage to work on systems with longer salts + (ie FreeBSD without DES libs) +* various spelling fixes (db) +* N: line checking in m_server() (db) +* WARN_NO_NLINE define added to config.h + +----------------------------------------------------------------------------- ++hybrid-3 (6/17/97): +* Added USRIP command. This command returns user@ip in a USERHOST + reply for local clients only. Requests for remote nicks are treated + as though the nick doesn't exist. +* Switched to Dianora's faster dich_conf.c +* Check for invalid characters (see RFC1035) in hostnames +* Fixed problem with coring due to invalid hostnames on non-local users +* TSora version 3 +* Turned D_LINE support back on +* Numerous changes to Config script, may actually work now +* Additional OS defs in Makefile +* Minor cleanup in include/config.h +# created new INSTALL document + +----------------------------------------------------------------------------- ++hybrid-2 (4/12/97): +This is ircd2.8/th.v5a.3 with the WHO, WHOWAS, and IsMember() code +from Comstud's irc2.8.21CSr29. Please send email to Jon Lusky + if you find problems with it. + +Relevant excerpt from irc2.8.21+CSr29/README.CS: +3) /whowas code totally rewritten. This code is better than Avalon's + ever was. You can now raise NICKNAMEHISTORYLENGTH in config.h to + a value that makes sense with today's number of clients. Without + rewriting, you could expect server lockup, mostly during splits. + These changes should lower CPU usage quite a bit, especially during + splits. +4) /who code tweaked. IsMember() = CPU hog...IsMember() has been changed + and m_who does less find_user_link()s now...much less. This is + a big reducer of CPU usage. Also another "bug" was removed from + m_who that can possibly cause server lockups. The possibility still + remains, though...not sure how to improve it further without totally + breaking /who. +5) This goes with #4, but... + /who nickname was optimized tremendously. However, this breaks /who + if you do /who username and username happens to match a nickname. + Oh well...too bad. + +----------------------------------------------------------------------------- ++hybrid-1 never really existed + diff --git a/doc/opers.txt b/doc/opers.txt new file mode 100755 index 0000000..547a733 --- /dev/null +++ b/doc/opers.txt @@ -0,0 +1,200 @@ +The following outlines the features and commands +that Bahamut has for operators of the server. +- 11/13/02 - srd (srd@dal.net) +- 10/02/04 - Quension (quension@dal.net) + +Based upon opers.txt for ircd-hybrid by: +ThemBones (kraemer@u.washington.edu) + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= + +Usermodes: (* designates that the umode is oper only) + + USERMODE DESCRIPTION +----------------------------------------------------------------- + +i - Is 'invisible'. + +w - Can see wallops messages. + +r - Is registered/identified to services. + +s - Can see oper kill messages. + +R - Will not receive messages from -r clients. + *+a - Designates the user as being a services administrator. + *+b - Can see chatops messages. + *+c - Can see client connections and exits. + *+d - Can see debug messages. + *+e - Can see dccallow failure notices. + *+f - Can see flood messages. + *+g - Can recieve globops messages. + *+h - Is available for help, being listed in /stats P + *+j - Can see rejected connection notices + *+k - Can see server kill messages. + *+m - Can see spambot notices. + *+n - Can see routing notices. + *+o - Is a global IRC Operator. + *+y - Can see certain information requests. (e.g. /stats) + *+A - Is a server administrator. + *+F - Can bypass the ircd's recvq throttling + *+K - Can see U:lined kill messages + *+O - Is a local IRC Operator. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= + +Oper Commands: (+ indicates that /quote must be used with ircII) + +COMMAND - USAGE and DESCRIPTION +------------------------------------------------------------------- + SQUIT - SQUIT [reason] + Splits away from your side of the net with + [reason]. + + KILL - KILL + Disconnects user from the IRC server he/she + is connected to with reason . + Local Opers can only kill clients on their servers. + Global Opers can kill clients on any server on the + IRC network. + + STATS - STATS [server|nick] + Queries server [server] (or your own server if no + server parameter is given) for info corresponing to + . + LETTER (* = Oper only.) + ------ (^ = Can be configured to be oper only.) + * a - Shows akills + * c - Shows connect blocks + * D - Shows special clone limits + * d - Shows clone limit statistics + * G - Shows local gcos restrictions + * g - Shows network gcos restrictions (sglines) + i - Shows allow blocks + * K - Shows permanent K lines + * k - Shows temporary K lines + l - Shows hostname and generic info about [nick] + * m - Shows commands and their usage + ^ o - Shows oper bocks + p - Shows opers connected and their idle times + * Q - Shows local nick/chan restrictions + * q - Shows network nick/chan restrictions (sqlines) + r - Shows resource usage by ircd (only in DEBUGMODE) + * s - Shows server name cache + * T - Shows throttle stats + * t - Shows generic server stats + * U - Shows super (U-Lined) servers. + u - Shows server uptime + v - Shows connected servers and their idle times + * w - Shows fd list (only in DEBUGMODE) + y - Shows class blocks + * z - Shows memory stats + ? - Shows network traffic statistics bdefgjnx + + CONNECT - CONNECT [port [server_B]] + When [server_B] is used, CONNECT asks [server_B] to + connect to . Global Opers only. + + When [server_B] is not used, CONNECT trys to connect + your server to . Local and Global Opers. + + When [port] is used, the connection will be attempted + to [port]. When [port] is not used, a default will be + chosen from the conf. + ++ WALLOPS - WALLOPS : + Sends a WALLOPS message of to all users + who are umode +w (this includes non-opers). + ++ LOCOPS - LOCOPS : + Sends an LOCOPS message of to all + opers on local server who are umode +g + ++ GLOBOPS - GLOBOPS : + Sends an GLOBOPS message of to all + opers on the network who are umode +g + ++ CHATOPS - CHATOPS : + Sends an CHATOPS message of to all + opers on the network who are umode +b + + TRACE - TRACE [server|nick] + TRACE shows client info about [server|nick] or about + the server you are on if no [server|nick] is given. + + All users that use TRACE can see the path to + [server|nick] if given and all servers and opers + connected, as well as the connection class they + fall into. + + Opers can see unregistered connections on a server + with TRACE as well as connection class counts. + + REHASH - REHASH [option] + When no [option] is given, ircd will re-read the + ircd.conf file. + + [option] can be one of the following: + DNS - Re-read the /etc/resolv.conf file + TKLINES - Clears temporary klines + GC - Performs garbage collecting of excess + memory. + MOTD - Re-reads MOTD files + THROTTLES - Clears connection throttles + AKILLS - Clears akills + SQLINES - Clears sqlines + SGLINES - Clears sglines + TSQGLINES - Clears temporary nick/channel/gcos blocks + + RESTART - RESTART + Restarts the IRC server. + + CLOSE - CLOSE + Close any connections from clients who have not fully + registered yet. + + DIE - DIE + Terminates the IRC server. + ++ DNS - DNS + Shows some stats about ircd's asynchronous resolving + code + ++ KLINE - KLINE [minutes] :[reason] + Adds a KLINE to the ircd.conf or klines.conf file which + will ban the specified user from using that server. + The banned client will receive a message saying he/she + is banned with reason [reason] + + For a temporary KLINE, length of kline is given in + minutes as the first parameter i.e. + KLINE 10 :cool off for 10 minutes + ++ UNKLINE - UNKLINE + -- If compiled with UNKLINE -- + Will attempt to unkline the given + ++ SET - SET